User manual DENON AVR-3310CI

[. . . ] If this sound is reproduced in the home theater without correction, the high-frequency range is too strong. The AVR-3310CI features a Cinema Equalizer to correct these high-frequency components so that the sound is clearer and easier to listen to. (For Dolby Digital, Dolby Pro Logic II, Dolby Digital EX and DTS surround modes) s Personal Memory Plus, for Easy Operation The AVR-3310CI includes the Personal Memory Plus function that automatically remembers the surround mode you last used for each program source, so that you do not need to select the mode again for that program. s Fully Discrete, Equal Power Six Amplifier Channels, 90 Watts Each 90 W + 90 W 90 W 90 W + 90 W 90 W (8 ohms, 20 Hz - 20 kHz, 0. 08 % THD) (8 ohms, 20 Hz - 20 kHz, 0. 08 % THD) (8 ohms, 20 Hz - 20 kHz, 0. 08 % THD) (8 ohms, 20 Hz - 20 kHz, 0. 08 % THD) On Screen Display Front Center Surround Surround Back The AVR-3310CI lets you make system settings via diaplays on your TV scren from the comfort of your chair. s Acclaimed Customization Feature For optimum Dolby Digital and DTS reproduction, the AVR-3310CI features high quality, wideband audio amplification, providing 90 watts power output for each of the six main channels. [. . . ] COAXIAL X 1 · Audio Outputs 1 Analog PRE OUT Terminals. . . . . . . . . . . . . SUBWOOFER 3 Analog REC OUT Terminals. . . . . . . . . . . . . . VCR-1, VCR-2, CDR/TAPE 1 Analog Multi Zone 2 Output. . . . . . . . . . . . . . L/R 1 Digital (Optical) Output . . . . . . . . . . . . . . . . . . . . . OPTICAL x 1 Virtual Surround Mode Surround yourself with sensational 3D soundfield envelopment using just one pair of speakers. The AVR-3310CI's Virtual Surround mode provides a dramatic psychoacoustic surround sound effect, using two speakers with all sources. s · Video Inputs 2 Component Video Input. . . . . . . . . . . . . . . . . . . . VIDEO1, VIDEO2 5 Composite Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 W (8 ohms, 20 Hz - 20 kHz, 0. 08 % THD) 125 W (6 ohms, 1 kHz, 0. 7 % THD) s Multi Zone Power Amplifier Assign The AVR-3310CI's Power Amplifier Assign function lets you assign the Surround Back (SB) amplifier channel when the system is not configured for 6. 1 to instead drive the Multi-room Zone 2 speaker (mono), with 90 Watts per channel output power, while still providing 5 discrete amplifier channels to drive all speakers in a 5. 1 configured home theater room. s s s s s s s s REC OUT Selector High-quality Component Video In/Out Terminals Video Conversion Digital Optical Output Front Panel Inputs (with S-Video, Digital Optical Input) Front A/B Speaker Terminals High-grade Speaker Terminals (except speakers B) Preamplifier Section Input sensitivity/Impedance PHONO(MM) . . . . . . . . . . . . . . . . . 2. 5 mV/47 kohms CD, DVD/VDP, TV/DBS, VCR-1, VCR-2, CDR/TAPE, V. AUX(FRONT) . . . . . . . . . . . . . 200 mV/47 kohms Output level/Load impedance SUBWOOFER . . . . . . . . . . . . . . . 1. 2 V/10 kohms CDR/TAPE, VCR-1, VCR-2, ZONE2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mV/47 kohms Frequency response . . . . . . . . . . 10 Hz - 100 kHz (+1, -3 dB) (Tone Defeat On) Signal-to-noise ratio . . . . . . . . . . . 100 dB (IHF-A weighted) (Tone Defeat On) Tone control . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 434 (W) x 171 (H) x 416 (D) mm 17. 1" (W) x 6. 7" (H) x 16. 4" (D) Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11. 9 kg, 28. 6 lbs *Design and specifications are subject to change without notice. *"Dolby", "Dolby Digital", "Pro Logic II", "Dolby Digital EX" and the double-D device are registered trademarks of Dolby Laboratories Licensing Corporation. [. . . ]