User manual DENON AVR-3311CI

[. . . ] PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE CABINET FOR FUTURE REFERENCE" caractéristiques qu'offre cet appareil, lire avec soin ces instructions et bien utiliser l'appareil. Toujours conserver ce mode d'emploi pour s'y référer ultérieurement en cas de question ou de problème. DE SERIE PRIERE DE NOTER LE NUMERO DE SERIE DE L'APPAREIL INSCRIT A L'ARRIERE DU COFFRET DE FAÇON A POUVOIR LE CONSULTER EN CAS DE PROBLEME. " ENGLISH FRANCAIS 2 SAFETY PRECAUTIONS FCC INFORMATION (For US customers) 1. PRODUCT This product complies with Part 15 of the FCC Rules. [. . . ] Press the SPEAKER A or B button to turn the speaker on. SPEAKER A B (Main unit) (Remote control unit) · The front speaker A, B setting can be also be changed with the SPEAKER button on the remote control unit. 36 ENGLISH Playing the input source 11 2 5 3 1 3 1 Select the input source to be played. Example: CD FUNCTION 5 (Main unit) (Remote control unit) To select the input source when ZONE2/REC OUT is selected, press the MAIN button then operate the input function selector. 2 MAIN (Main unit) 2 Select the input mode. · Selecting the analog mode Press the ANALOG button to switch to the analog input. ANALOG (Main unit) (Remote control unit) · Selecting the external input (EXT. IN (Main unit) (Remote control unit) · Selecting the AUTO, PCM and DTS modes The mode switches as shown below each time the INPUT MODE button is pressed. AUTO PCM DTS Input mode selection function Different input modes can be selected for the different input sources. The selected input modes for the separate input sources are stored in the memory. q AUTO (auto mode) In this mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected and the program in the AVR-3311CI/785's surround decoder is selected automatically upon playback. This mode can be selected for all input sources other than TUNER. The presence or absence of digital signals is detected, the signals input to the digital input jacks are identified and decoding and playback are performed automatically in DTS, Dolby Digital or PCM (2 channel stereo) format. If no digital signal is being input, the analog input jacks are selected. Use this mode to play Dolby Digital signals. In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SUBWOOFER jack. 2 1 2 Cancelling the external input mode To cancel the external input (EXT. IN) setting, press the INPUT MODE (AUTO, PCM, DTS) or ANALOG button to switch to the desired input mode. (See page 37. ) INPUT MODE ANALOG (Main unit) (Remote control unit) · When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, STANDARD (DOLBY/DTS SURROUND), 5CH/7CH STEREO or DSP SIMULATION) cannot be selected. NOTES: · In play modes other than the external input mode, the signals connected to EXT. In addition, signals cannot be output from channels not connected to the input jacks. · The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode. · If the subwoofer output level seems to high, set the "SW ATT. " surround parameter to "ON". Playing audio sources (CDs and DVDs) The AVR-3311CI/785 is equipped with two 2-channel playback modes exclusively for music. Select the mode to suit your tastes. 1 DIRECT mode Use this mode to achieve good quality 2channel sound while watching images. In this mode, the audio signals bypass such circuits as the tone circuit and are transmitted directly, resulting in good quality sound. DIRECT / STEREO (Main unit) 1, 2 (Remote control unit) 2 STEREO mode Use this mode to adjust the tone and achieve the desired sound while watching images. DIRECT / STEREO 1 2 (Main unit) (Remote control unit) 39 ENGLISH After starting playback [1] Adjusting the sound quality (tone) The tone control function will not work in the direct mode. 1 The tone switches as follows each time the TONE CONTROL button is pressed. TONE CONTROL BASS TREBLE (Main unit) 2 With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level. 2 31 SELECT (Main unit) 3 If you do not want the bass and treble to be adjusted, turn on the tone defeat mode. TONE DEFEAT · To increase the bass or treble: Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB. ) · To decrease the bass or treble: Turn the control counterclockwise. [. . . ] · Improper position of the audio function button. · Digital signals not input Digital input selected. · Speaker terminals are short-circuited. · Block the ventilation holes of the set. 14, 15 37 38 40 38 14, 15 5, 14 DISPLAY not lit and power indicator is flashing rapidly. [. . . ]