User manual DENON AVR-3808CI

[. . . ] Keep the set free from moisture, water, and dust. Unplug the power cord when not using the set for long periods of time. Do not let insecticides, benzene, and thinner come in contact with the set. Never disassemble or modify the set in any way. [. . . ] The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode. [4] Combining the currently playing sound with the desired image Simulcast playback Use this switch to monitor a video source other than the audio source. With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level. If you do not want the bass and treble to be adjusted, turn on the tone defeat mode. The signals do not pass through the bass and treble adjustment circuits, so it provides higher quality sound. NOTE: To prevent hearing loss, do not raise the volume level excessively when using headphones. Also, the unit's operating status can be checked during playback by pressing the remote control unit's ON SCREEN/DISPLAY button. 1 The pre-out output (including the speaker output) is automatically turned off when headphones are connected. Use this to turn off the audio output temporarily. Playing one source while recording another (REC OUT mode) Before playing with the surround function With "RECOUT SOURCE" displayed, turn the FUNCTION knob to select the source you wish to record. The settings are automatically finalized and the normal display reappears after several seconds. When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed. The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround. The game mode can only be used with 2-channel audio sources. select one of the modes ("Cinema" , "Music" , "Pro Logic"or "Game"). Panorama Control: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. select "OFF" or "ON". Dimension Control: This control gradually adjust the soundfield either towards the front or towards the rear. The control can be set in 7 steps from 0 to 6. Center Width Control: This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phantom image; or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7. [. . . ] Even with the high quality multi-channel signals, the recording time is the same as with conventional DTS surround sources. What's more, DTS 96/24 is fully compatible with the conventional DTS surround format, so DTS 96/24 signal sources can be played with a sampling frequency of 48 kHz or 44. 1 kHz on conventional DTS or DTS-ES surround decoders ( 2). 1 2 A DVD player with DTS digital output capabilities (for CD/LD players, a player with digital outputs for conventional DTS CDs/LDs) and a disc recorded in DTS 96/24 are required. [. . . ]