User manual DENON AVR-391

[. . . ] Se till att det finns möjlighet till god värmeavledning vid montering i ett rack. Do not let foreign objects into the apparatus. Unplug the power cord when not using the apparatus for long periods of time. Do not let insecticides, benzene, and thinner come in contact with the apparatus. [. . . ] eFFECT LEVEL: This sets the strength of the surround effect. The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted. DELAY TIME: The delay time can be set within the range of 0 to 110 ms only in the matrix mode. TONE CONTROL: This can be set individually for each surround mode except DIRECT. You can adjust the channel level either according to the playback sources or to suit your taste, as described below. Press the CH SELECT button to select the speaker whose level you want to adjust. Turn the SELECT knob to adjust the level of the bass or treble. (The bass or treble sound can be decreased down to ­12 dB in steps of 2 dB. When the surround back speaker setting is set to "1sp" for "Speaker Configuration", this is set to "SB". If you do not want the bass and treble to be adjusted, turn on the tone defeat mode. When a broadcast station is found, that station's name appears on the display. If no TP station is found with the above operation, all the reception bands are searched. If there is no station broadcasting the designated program type with the above operation, all the reception bands are searched. If no other TP station is found when all the frequencies have been searched, "NO PROGRAMME" is displayed. While receiving an RDS broadcast station, the text data broadcast from the station is displayed. To turn the display off, press the RT button again. While this remote control is compatible with a wide range of infrared controlled components, it may be the case that some component models cannot be operated with this remote control. Rewind Fast-forward Stop Forward play Reverse play Switch between decks A and B Manual search (forward and reverse) Stop Play Auto search (cue) Pause Switch discs (for CD changers only) Switch preset channel range Preset channel up/down Frequency up/down Switch between the AM and FM bands : Switch between auto and mono : Preset memory TUNER can be operated when the switch is at "AUDIO" position. Referring to the included list of preset codes, press the NUMBER buttons to input the preset code (a 3-digit number) for the manufacturer of the component whose signals you want to store in the memory. To store the codes of another component in the memory, repeat steps 1 to 4. DENON and other makes of components can be operated by setting the preset memory. [. . . ] For example, there are high picture/sound quality DVD video sources with 96 kHz/24-bit stereo PCM audio tracks. However, because the data rate for these audio tracks is extremely high, there are limits to recording them on two channels only, and since the quality of the pictures must be restricted it is common to only include still pictures. 1-channel surround is possible with DVD audio sources, but DVD audio players are required to play them with this high quality. dTS 96/24 is a multi-channel digital signal format developed by Digital Theater Systems Inc. [. . . ]