User manual DENON AVR-4310CIAVC-4310 CONTROL PROTOCOL

[. . . ] <Gateway> Set the address of Gateway when Gateway is on the local network. Do not set this parameter when Gateway is not on the local network. <Primary DNS> Do not set this parameter. <Second DNS> Do not set this parameter. [. . . ] SRIPOD<CR> REC SELECT mode cancel SRSOURCE<CR> Return SR Status SR?<CR> example 9/52 COMMAND SD DC SV SLP PARAMETER AUTO HDMI DIGITAL ANALOG EXT. IN ?DVD HDP TV SAT/CBL VCR DVR V. AUX SOURCE ?OFF 120 90 60 30 ? function set AUTO mode (Priority:HDMI>>DIGITAL>>ANALOG) set force HDMI INPUT mode set force DIGITAL INPUT (Optical, Coaxial)mode set force ANALOG INPUT mode ---Set EXT. IN mode at AVR-4310 Return SD Status set DIGITAL INPUT AUTO mode set DIGITAL INPUT force PCM mode set DIGITAL INPUT force DTS mode Return DC Status VIDEO SELECT mode set , and select source example SDAUTO<CR> SDHDMI<CR> SDDIGITAL<CR> SDANALOG<CR> SDEXT. IN<CR> SD?<CR> DCAUTO<CR> DCPCM<CR> DCDTS<CR> DC?SVDVD<CR> SVHDP<CR> SVTV/CBL<CR> SVSAT<CR> SVVCR<CR> SVDVR<CR> SVV. AUX<CR> SVSOURCE<CR> SV?<CR> SLPOFF<CR> SLP120<CR> SLP90<CR> SLP60<CR> SLP30<CR> SLP?<CR> VIDEO SELECT mode cancel Return SV Status MAIN ZONE SLEEP TIMER setting Return SLP Status 10/52 COMMAND MS PARAMETER DIRECT PURE DIRECT STEREO STANDARD DOLBY DIGITAL DTS SUROUND NEURAL WIDE SCREEN 7CH STEREO SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE MATRIX VIDEO GAME VIRTUAL ?QUICK1 QUICK2 QUICK3 QUICK4 QUICK5 QUICK1 MEMORY QUICK2 MEMORY QUICK3 MEMORY QUICK4 MEMORY QUICK5 MEMORY QUICK ? function Select SURROUND mode North America model only Return MS Status QUICK SELECT 1-5 MODE SELECT QUICK SELECT 1-5 MEMORY Return MSQUICK Status example MSDIRECT<CR> MSPURE DIRECT<CR> MSSTEREO<CR> MSSTANDARD<CR> MSDOLBY DIGITAL<CR> MSDTS SURROUND<CR> MSNEURAL<CR> MSWIDE SCREEN MS7CH STEREO<CR> MSSUPER STADIUM<CR> MSROCK ARENA<CR> MSJAZZ CLUB<CR> MSCLASSIC CONCERT<CR> MSMONO MOVIE<CR> MSMATRIX<CR> MSVIDEO GAME<CR> MSVIRTUAL<CR> MS?<CR> MSQUICK1<CR> MSQUICK2<CR> MSQUICK3<CR> MSQUICK4<CR> MSQUICK5<CR> MSQUICK1 MEMORY<CR> MSQUICK2 MEMORY<CR> MSQUICK3 MEMORY<CR> MSQUICK4 MEMORY<CR> MSQUICK5 MEMORY<CR> MSQUICK ?<CR> 11/52 COMMAND VS PARAMETER MONIAUTO MONI1 MONI2 MONI ?SC48P SC10I SC72P SC10P SC10P24 SCAUTO SC ?SCH48P SCH10I SCH72P SCH10P SCH10P24 SCHAUTO SCH ?VST ON VST OFF VST ? function Set HDMI MONITOR automatic detection Set HDMI MONITOR OUT-1 Set HDMI MONITOR OUT-2 Return VSMONITOR Status Set Normal mode Set FULL mode Return VSASPECT Status Set Resolution to 480p/576p Set Resolution to 1080i Set Resolution to 720p Set Resolution to 1080p Set Resolution to 1080p:24Hz Set Resolution to AUTO Return VSSCALE Status Set Resolution to 480p/576p (HDMI) Set Resolution to 1080i(HDMI) Set Resolution to 720p(HDMI) Set Resolution to 1080p(HDMI) Set Resolution to 1080p:24Hz(HDMI) Set Resolution to AUTO(HDMI) Return VSSCH Status(HDMI) Set HDMI AUDIO Output to AMP Set HDMI AUDIO Output to TV Return VSAUDIO Status Set VERTICAL STRETCH to ON Set VERTICAL STRETCH to OFF Return VSVST Status example VSMONIAUTO<CR> VSMONI1<CR> VSMONI2<CR> VSMONI ?<CR> VSASPNRM<CR> VSASPFUL<CR> VSASP ?<CR> VSSC48P<CR> VSSC10I<CR> VSSC72P<CR> VSSC10P<CR> VSSC10P24<CR> VSSCAUTO<CR> VSSC ?<CR> VSSC48P<CR> VSSC10I<CR> VSSC72P<CR> VSSC10P<CR> VSSC10P24<CR> VSSCAUTO<CR> VSSCH ?<CR> VSAUDIO AMP<CR> VSAUDIO TV<CR> VSAUDIO ?<CR> VSVST ON<CR> VSVST OFF<CR> VSVST ?<CR> 12/52 COMMAND PS PARAMETER TONE CTRL OFF TONE CTRL ON TONE CTRL ?SB:MTRX ON SB:PL2x CINEMA SB:PL2x MUSIC SB:ON SB:OFF SB: ?MODE:MUSIC MODE:CINEMA MODE:GAME MODE:PRO LOGIC MODE: ?MULTEQ:AUDYSSEY MULTEQ:BYP. LR MULTEQ:FLAT MULTEQ:MANUAL MULTEQ:OFF MULTEQ: ?REFLEV 0 REFLEV 5 REFLEV 10 REFLEV 15 REFREV ? example PSTONE CTRL OFF<CR> PSTONE CTRL ON<CR> PSTONE CTRL ?<CR> PSSB:MTRX ON<CR> PSSB:PL2X CINEMA<CR> PSSB:PL2X MUSIC<CR> PSSB:ON<CR> PSSB:OFF<CR> Return PSSB: Status PSSB: ?<CR> CINEMA EQ. Setting = Day Return PSDYNSET Status DSX ON/OFF 14/52 COMMAND PS BAS BAS BAS BAS TRE TRE TRE TRE DRC DRC DRC DRC DRC DRC DCO DCO DCO DCO DCO LFE LFE LFE LFE EFF EFF EFF EFF DEL DEL DEL DEL AFD AFD AFD PS COMMAND : PARAMETER UP DOWN ** ?"*" parameter example function BASS UP/DOWN , direct change to **dB PSBAS UP<CR> **:00 to 99 by ASCII , 50=0dB PSBAS DOWN<CR> ---AVR-4310 can be operated from -6 to +6(44 to 56) PSBAS 50<CR> Return PSBAS Status PSBAS ?<CR> TREBLE UP/DOWN , direct change to **dB PSTRE UP<CR> **:00 to 99 by ASCII , 50=0dB PSTRE DOWN<CR> ---AVR-4310 can be operated from -6 to +6(44 to 56) PSTRE 50<CR> Return PSTRE Status PSTRE ?<CR> DRC direct change PSDRC AUTO<CR> PSDRC LOW<CR> PSDRC MID<CR> PSDRC HI<CR> PSDRC OFF<CR> PSDRC ?<CR> D. COMP direct change PSDCO OFF<CR> PSDCO LOW<CR> PSDCO MID<CR> PSDCO HIGH<CR> Return PSDCO Status PSDCO ?<CR> LFE UP/DOWN , direct change to **dB PSLEE UP<CR> **:00 to 99 by ASCII , 00=0dB, 10=-10dB PSLFE DOWN<CR> ---AVR-4310 can be operated from 0 to -10(00 to 10) PSLFE 00<CR> Return PSLFE Status PSLFE ?<CR> EFFECT ON/OFF , EFFECT LEVEL direct change to **dB PSEFF UP<CR> **:00 to 99 by ASCII , 01=1, 15=15 PSEFF DOWN<CR> ---AVR-4310 can be operated from 1 to 15 PSEFF 10<CR> Return PSEFF Status PSEFF ?<CR> DELAY UP/DOWN , direct change to ***dB PSDEL UP<CR> ***:000 to 999 by ASCII , 000=0ms, 200=200ms PSDEL DOWN<CR> ---AVR-4310 can be operated from 0 to 200 PSDEL 200<CR> Return PSDEL Status PSDEL ?<CR> AFDM ON/OFF PSAFD ON<CR> PSAFD OFF<CR> Return PSAFD Status PSAFD ?<CR> uses two or three ASCII characters. (see page6 J) section) 15/52 COMMAND PS PARAMETER PAN ON PAN OFF PAN ?DELAY UP DELAY DOWN DELAY *** PS COMMAND : "*" parameter example PSPAN ON<CR> PSPAN OFF<CR> Return PSPAN Status PSPAN ?<CR> DIMENSION UP/DOWN , direct change to **dB PSDIM UP<CR> **:00 to 99 by ASCII , 00=0, PSDIM DOWN<CR> ---AVR-4310 can be operated from 0 to 6 PSDIM 00<CR> Return PSDIM Status PSDIM ?<CR> CENTER WIDTH UP/DOWN , direct change to **dB PSCEN UP<CR> **:00 to 99 by ASCII , 00=0 PSCEN DOWN<CR> ---AVR-4310 can be operated from 0 to 7 PSCEN 07<CR> Return PSCEN Status PSCEN ?<CR> CENTER IMAGE UP/DOWN , direct change to **dB PSCEI UP<CR> **:00 to 99 by ASCII , 00=0. 0 10=1. 0 PSCEI DOWN<CR> ---AVR-4310 can be operated from 0. 0 to 1. 0 PSCEI 10<CR> Return PSCEI Status OSCEI ?<CR> SW ATT ON/OFF PSATT ON<CR> PSATT OFF<CR> Return PSATT Status PSATT ?<CR> SW ON/OFF PSSWR ON<CR> PSSWR OFF<CR> Return PSSWR Status PSSWR ?<CR> ROOM SIZE direct change PSRSZ S<CR> PSRSZ MS<CR> PSRSZ M<CR> PSRSZ ML<CR> PSRSZ L<CR> Return PSRSZ Status PSRSZ ?<CR> AUDIO DELAY UP/DOWN , direct change to ***dB PSDELAY UP<CR> ***:000 to 999 by ASCII , 000=0ms, 200=200ms PSDELAY DOWN<CR> ---AVR-4310 can be operated from 0 to 200 PSDELAY 200<CR> uses two or three ASCII characters. (see page6 J) section) PANORAMA ON/OFF function 16/52 COMMAND PS PARAMETER function example PSRSTR OFF<CR> PSRSTR MODE1<CR> PSRSTR MODE2<CR> PSRSTR MODE3<CR> Return PSRSTR Status PSRSTR ?<CR> CONTRAST UP/DOWN , direct change to **dB PVCN UP<CR> **:44 to 56 by ASCII , 50=0 PVCN DOWN<CR> ---AVR-4310 can be operated from -6 to +6(44 to 56) PVCN 50<CR> Return PSCN Status PVCN ?<CR> BRIGHTNESS UP/DOWN , direct change to **dB PVBR UP<CR> **:00 to 12 by ASCII , 00=0 PVBR DOWN<CR> ---AVR-4310 can be operated from 0 to 12(00 to 12) PVBR 00<CR> Return PSBR Status PVBR ?<CR> CROMA LEVET UP/DOWN , direct change to **dB PVCM UP<CR> **:44 to 56 by ASCII , 50=0 PVSCM DOWN<CR> ---AVR-4310 can be operated from -6 to +6(44 to 56) PVCM 50<CR> Return PSCN Status PVCM ?<CR> HUE UP/DOWN , direct change to **dB PVHUE UP<CR> **:44 to 56 by ASCII , 50=0 PVHUE DOWN<CR> ---AVR-4310 can be operated from -6 to +6(44 to 56) PVHUE 50<CR> Return PSCN Status PVHUE ?<CR> PVDNR OFF<CR> DNR direct change PVDNR LOW<CR> PVDNR MID<CR> PVHUE HI<CR> PVDNR ?<CR> Return PVDNR Status PVENH UP<CR> ENHANCER UP/DOWN, direct change to **dB PVENH DOWN<CR> **:00 to 12 by ASCII, 00=0 ---AVR-4310 can be operated from 0 to 12(00 to 12) PVENH 00<CR> PVENH ?<CR> Return PVENH Status uses two ASCII characters. (see page6 J) section) AUDIO RESTORER direct change 17/52 RSTR OFF RSTR MODE1 RSTR MODE2 RSTR MODE3 RSTR ?PV COMMAND : "*" parameter COMMAND Z2 PARAMETER function example PHONO ZONE2 mode set , and select source at AVR-4310 Z2PHONO<CR> | ---The name of PARAMETER is | IPOD the same as that of the time of SI COMMAND. Z2IPOD<CR> SOURCE ZONE2 mode cancel at AVR-4310 Z2SOURCE<CR> UP ZONE2 VOLUME UP/DOWN , direct change to **dB Z2UP<CR> DOWN at AVR-4310 Z2DOWN<CR> **:00 to 99 by ASCII , 80=0dB, 99=---(MIN)00=-80dB Z280<CR> ** ON ZONE2 ON/OFF change at AVR-4310 Z2ON<CR> OFF Z2OFF<CR> ?Return Z2 Status Z2?<CR> Z2MU ON ZONE2 OUTPUT MUTE ON/OFF change Z2MUON<CR> OFF Z2MUOFF<CR> ? [. . . ] ZONE3 mode cancel ZONE3 VOLUME change , **:10 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 10 = -70dB 99 = ---(MIN) ZONE3 QUICK SELECT mode change example Z3PHONO<CR> | Z3IPOD<CR> Z3SOURCE<CR> Z380<CR> ---Z3 QUICK SELECT 1(or 2, 3, 4, 5) Change QUICK ZONE3 ON/OFF change ZONE3 OUTPUT MUTE ON/OFF change ZONE3 Channel setting ZONE3 BASS change **:40 to ---AVR-4310 can be operated ZONE3 TEBLE change **:40 to ---AVR-4310 can be operated ZONE3 HPF ON/OFF change ZONE3 BASS change ---AVR-4310 can be ZONE3 TEBLE change ---AVR-4310 can be ZONE3 SLEEP TIMER 60 by ASCII from -10 to 60 by ASCII from -10 to , 50=0dB +10(40 to , 50=0dB +10(40 to Z3HPF Z3PS ON OFF BAS ** TRE ** Z3SLP OFF 120 90 60 30 **:40 to 60 by ASCII operated from -10 to **:40 to 60 by ASCII operated from -10 to setting change , 50=0dB +10(40 to , 50=0dB +10(40 to Z3QUICK1<CR> Z3QUICK2<CR> Z3QUICK3<CR> Z3QUICK4<CR> Z3QUICK5<CR> OFF Z3QUICK0<CR> Z3ON<CR> Z3OFF<CR> Z3MUON<CR> Z3MUOFF<CR> Z3CSST Z3CSMONO Z3CVFL 50<CR> 60) Z3CVFR 50<CR> 60) Z3HPFON<CR> Z3HPFOFF<CR> Z3PSBAS 50<CR> 60) Z3PSTRE 50<CR> 60) Z3SLPOFF<CR> Z3SLP120<CR> Z3SLP90<CR> Z3SLP60<CR> Z3SLP30<CR> 42/52 ANALOG TUNER Control(AVR model only)except North America model EVENT TF PARAMETER AN****** (6 digits) function TUNER Frequency change --- ****. ** kHz at AM band ****. ** MHz at FM band TUNER PRESET change to No. ** TUNER BAND , MODE change ---Band set to AM ---Band set to FM ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode example TFAN105000<CR> (1050. 00kHz at AM) TPANA1<CR> (PRESET No. "A1") TMANAM<CR> TMANFM<CR> TMANAUTO<CR> TMANMANUAL<CR> TP TM AN**(PRESET No. ) ANAM ANFM ANAUTO ANMANUAL XM Control(North America model only) EVENT TF TP XM PARAMETER XM*** (3 digits) XM**(PRESET No. ) CH NAME ******** (8 digit) ARTIST **************** (16 digit) TITLE **************** (16 digit) XMID ******** (8 digit) SIGNAL GOOD SIGNAL WEAK SIGNAL MARGINAL SIGNAL NOSIGNAL function --- ***:XM CH No. XM PRESET change to No. ** XM CH NAME change XM ARTIST NAME change example TFXM001<CR> (XM001 CH) TPXMA1<CR> (PRESET No. "A1") TMCH NAME 20 on 20<CR> TMARTIST EMINEM <CR> XM TITLE NAME change TMTITLE JUST LOSE IT <CR> XM RADIO ID(XM000 Selected) XM ANTENNA SIGNAL STATUS change TMXMID J3JU703B<CR> TMSIGNAL TMSIGNAL TMSIGNAL TMSIGNAL GOOD<CR> WEAK<CR> MARGINAL<CR> NOSIGNAL<CR> 43/52 SIRIUS Control(North America model only) COMMAND TF PARAMETER ST*** (3 digits) STPL ON STPL OFF STUL OK STUL NG STCH SUB STCH UNS STMP VAL STMP INV ST CHECK ANT ST** (PRESET No. ) CH NAME ***************** (20 digits) ARTIST ***************** (36 digits) TITLE ***************** (36 digits) COMPOSER ***************** (36 digits) ID ************ (12 digits) SIGNAL EXCELLENT SIGNAL GOOD SIGNAL WEAK SIGNAL NOSIGNAL function --- ***:ST CH No. Parental Lock Status "ON" Parental Lock Status "OFF" Unlocking is successful Unlocking is failed Subscribed channel Unsubscribed channel Valid Channel Invalid Channel SIRIUS TUNER is not connected SIRIUS PRESET change to No. ** SIRIUS CH NAME change example TFST001<CR> (ST001 CH at SIRIUS TUNER) TFSTPL ON<CR> TFSTPL OFF<CR> TFSTUL OK<CR> TFSTUL NG<CR> TFSTCH SUB<CR> TFSTCH UNS<CR> TFSTMP VAL<CR> TFSTMP INV<CR> TFST CHECK ANT<CR> TPSTA1<CR> (PRESET No. "A1") STCH NAME Hit song<CR> TP ST SIRIUS ARTIST NAME change STARTIST High and mighty color <CR> STTITLE Memory Crysis <CR> STCOMPOSER High and mighty color <CR> STID 123456789012<CR> STSIGNAL STSIGNAL STSIGNAL STSIGNAL EXCELLENT<CR> GOOD<CR> WEAK<CR> NOSIGNAL<CR> SIRIUS TITLE NAME change SIRIUS COMPOSER NAME change SIRIUS ID(SR000 Selected) SIRIUS ANTENNA SIGNAL STATUS change 44/52 HD RADIO Control(North America model only) EVENT TF PARAMETER HD****** (6 digits) HDMC*(1 digit) HD**(PRESET No. ) function --- ****. ** kHz at AM band (>050000 is AM. ) ****. ** MHz at FM band (<050000 is FM. ) ---HD Multi Cast CH change(*:0 8) HD PRESET change to No. ** HD RADIO BAND , MODE change ---Band set to AM ---Band set to FM ---Tuning mode set to AUTO-HD mode ---Tuning mode set to AUTO mode ---Tuning mode set to MANUAL mode HD STATION NAME change HD STATION LONG NAME change HD ANTENNA SIGNAL STATUS change example TPHD105000<CR> (1050. 00kHz at AM) TFHDMC2<CR> TPHDA1<CR> (PRESET No. "A1") TMHDAM<CR> TMHDFM<CR> TMHDAUTOHD<CR> TMHDAUTO<CR> TMHDMANUAL<CR> HDST NAME ********<CR> HDSTL NAME (56 digits)<CR> HDSIG HDSIG HDSIG HDSIG HDSIG HDSIG HDSIG HDMLT LEV 0<CR> LEV 1<CR> LEV 2<CR> LEV 3<CR> LEV 4<CR> LEV 5<CR> LEV 6<CR> CURRENT *<CR> TP TM HD HDAM HDFM HDAUTOHD HDAUTO HDMANUAL ST NAME (8 digits) STL NAME (56 digits) SIG LEV * (1 digit) MLT CURRENT * (1 digit) MLT CAST CH (8 digits) PTY(18 digits) ARTIST(40 digits) TITLE(40 digits) ALBUM(40 digits) GENRE(23 digits) MODE HD MULTI CAST CURRENT CH change HD MULTI CAST CH change HD HD HD HD HD HD PROGRAM TYPE change ARTIST NAME change TITLE NAME change ALBUM NAME change GANRE change MODE(ANALOG/DIGITAL) HDMLT CAST CH ********<CR> HDPTY (18 digits)<CR> HDARTIST (40 digits)<CR> HDTITLE (40 digits)<CR> HDALBUM (40 digits)<CR> HDGENRE (23 digits)<CR> HDMODE ANALOG<CR> HDMODE DIGITAL<CR> 45/52 Network/iRadio/mServer/USB/Rhapsody/Napster/iPod Direct Extended Control EVENT NSA 0 1 2 3 4 5 6 7 8 PARAMETER function Onscreen Display Information is Answered By the NSA Command. Display Line1 Information Display Line3 Information Display Line4 Information Display Line5 Information Display Line6 Information Display Line7 Information Display Line8 Information Display Line9 Information Display Line10 Information NSA0**************_?????<CR> NSA1 ************_?????<CR> NSA2 ************_?????<CR> NSA3 ************_?????<CR> NSA4 ************_?????<CR> NSA5 ************_?????<CR> NSA6 ************_?????<CR> NSA7**************_?????<CR> NSA8**************_?????<CR> *:Character Length MAX96 _:Null ?:Exclusion(The character after Null should be disregarded) :Cursor&Playable Music Information Data(1Byte) Bit1:Playable Music =1 Bit2, 3:Don't Care Bit4:CURSOR SELECT=1 Bit5, 6, 7, 8:Don't Care <example> NSA0Now Playing USB_????<CR> NSA1 Come Away With Me_???<CR> NSA2 Norah Jones_?????????<CR> NSA3 _????????????????????<CR> NSA4 _????????????????????<CR> NSA5 00:11 100%_???????<CR> NSA6 _????????????????????<CR> NSA7_????????????????????<CR> NSA8_????????????????????<CR> 46/52 EVENT NSE 0 1 2 3 4 5 6 7 8 PARAMETER function Onscreen Display Information(mserver/iRadio) is Answered By the NSE Command. [. . . ]