User manual DENON AVR-4806

[. . . ] While ground wave radio stations can only be listened to within the range in which the waves reach, Internet radio can be listened to anywhere in the world. The AVR-5805/4806 is equipped with the following Internet radio functions: · Stations can be selected by genre and region. · Up to 56 Internet radio stations can be preset. · MP3 format Internet radio programs can be listened to. [. . . ] In this case, some knowledge of networks is required. · Once the settings are completed, press the ENTER button three times to quit the "System Setup Menu". Standby Mode Power Saving When not using the AVR-5805/4806 connected in a network, set "ON" to reduce the power consumption when in the standby mode. Set "OFF" when using the AVR-5805/4806 connected in a network. *AVR-5805 only 2 DHCP (Dynamic Host Configuration Protocol) and Auto IP These are systems by which the IP address and other network settings are automatically set for the AVR5805/4806, computer, broadband router and network devices. 5. Primary DNS / Secondary DNS Set the IP address within the ranges shown below. If there is only one DNS address indicated in the documentation supplied by your provider, input it at "e. If there are two or more DNS addresses, input the first one at "f. 2nd". PC Language Select according to the language of the computer being used. The languages are indicated with three letters conforming to ISO639-2. 2 DNS (Domain Name System) This is a system for converting the domain names used when browsing Internet sites (for example, "www. jp") into the IP addresses actually used for communications (for example, "202. 221. 192. 106"). Setting the Proxy Make this setting when connecting to the Internet via a proxy server. 1. Proxy: In some cases it is necessary to pass through a proxy server to connect to the Internet. OFF (default settings): The proxy server is disabled. 2. Proxy Address/Name Input the proxy server domain name or address. If "ON" has been set at the "Proxy" setting, the character input mode is set when this item is selected and the CURSOR G button is pressed. Use the CURSOR D, H, F and G buttons to choose the character, then press the ENTER button. Once all the characters have been input, the character input mode is canceled. 3. Port Input the proxy server port number. If "ON" has been set at the "Proxy" setting, the number input mode is set when this item is selected and the CURSOR G button is pressed. Use the CURSOR D, H, F and G buttons to choose the number, then press the ENTER button. Once all the numbers have been input, the number input mode is canceled. Setting the IP Address 1. DHCP Settings Set whether or not to make the DHCP settings automatically. ON (default settings): The DHCP function is enabled. 2. IP Address Set the IP address within the ranges shown below. The Net Audio function cannot be used if other IP addresses are set. CLASS A: 10. 0. 0. 0 ~ 10. 255. 255. 255 CLASS B: 172. 16. 0. 0 ~ 172. 31. 255. 255 CLASS C: 192. 168. 0. 0 ~ 192. 168. 255. 255 3. Subnet Mask When connecting an xDSL modem or terminal adapter directly to the AVR-5805/4806, input the subnet mask indicated in the documentation supplied by your provider. [. . . ] Use or distribution of such technology outside of this product is prohibited without a license from Nothing Else Matters Software and BridgeCo or an authorized subsidiary. · No signals are output to the digital output terminals when playing copyright-protected music files. · The AVR-5805/4806 is compatible with "MPEG-1 Audio Layer3" MP3 files (with sampling frequencies of 32, 44. 1 or 48 kHz). It is not compatible with "MPEG-2 Audio Layer-3", "MPEG-2. 5 Audio Layer-3", "MP1" or "MP2" files. · The AVR-5805/4806 is compatible with bit rates of 32 to 320 kpbs for MP3 files and 48 to 192 kpbs for WMA files. [. . . ]