User manual DENON AVR-484

[. . . ] AV SURROUND RECEIVER AVR-1404/484 OPERATING INSTRUCTIONS MODE D'EMPLOI FOR ENGLISH READERS PAGE 2 ~ PAGE 50, 98 ~ 102 POUR LES LECTEURS FRANCAIS PAGE 2, 51 ~ PAGE 102 2 We greatly appreciate your purchase of this unit. 2 To be sure you take maximum advantage of all the 2 Nous vous remercions pour l'achat de cet appareil. 2 Pour être sûr de profiter au maximum de toutes les features this unit has to offer, read these instructions carefully and use the set properly. Be sure to keep this manual for future reference should any questions or problems arise. [. . . ] Have you operated the receiver according to the Operating Instructions ?Are the speakers and other components operating property ?If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. Disconnect the power immediately and contact your store of purchase. Symptom Cause · Power cord not plugged in securely. DISPLAY not lit and sound not produced when power switch set to on. Measures · Check the insertion of the power cord plug. · Turn the power off with the remote control unit after turning the POWER operation switch on. · Turn volume up to suitable level. · Input digital signals or select input jacks to which digital signals are being input. · Switch power off, connect speakers properly, then switch power back on. · Turn off the set's power, then ventilate it well to cool it down. Once the set is cooled down, turn the power back on. · Turn off the set's power, then ventilate it well to cool it down. Once the set is cooled down, turn the power back on. Page 9 26 Common problems arising when listening to the CD, records, tapes, and FM broadcasts, etc. DISPLAY lit but sound not produced. · Speaker cords not securely connected. · Improper position of the audio function button. · Digital signals not input Digital input selected. · Speaker terminals are short-circuited. · Block the ventilation holes of the set. 13, 14 27 28 29 27 13, 14 5, 14 DISPLAY not displayed and the "ON/STANDBY" LED flashes at a high rate · The unit is operating at continuous high power conditions and/or inadequate ventilation. 5, 14 Sound produced only from one channel. · Incomplete connection of speaker cords. · Incomplete connection of input/output cords. · Reverse connections of left and right speakers or left and right input/output cords. [. . . ] · Mauvaise position de la touche de fonction audio. · Commande de volume réglée au minimum. · La sourdine (MUTING) est activée. · Signaux numériques pas entrés lorsque l'entrée numérique est sélectionnée. 60, 61 74 75 76 74 · Les bornes d'enceinte sont court-circuitées. 60, 61 Affichage n'est pas affiché et la LED "ON/STANDBY" clignote de façon rapide. · Les trous de ventilation de l'appareil sont obstrués. [. . . ]