User manual DENON AVR-700RD

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. · ÜBEREINSTIMMUNGSERKLÄRUNG Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das sich diese Erklärung bezieht, den folgenden Standards entspricht: EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-3-3. Entspricht den Verordnungen der Direktive 73/23/EEC, 89/336/EEC und 93/68/EEC. VORSICHT: Um dieses Gerät vollständig von der Stromversorgung abzutrennen, trennen Sie bitte den Netzstecker von der Wandsteckdose ab. Stellen Sie bei der Aufstellung dieses Gerätes sicher, dass die zu verwendende Wechselstrom-Steckdose leicht zugänglich ist. · DECLARATION DE CONFORMITE Nous déclarons sous notre seule responsabilité que l'appareil, auquel se réfère cette déclaration, est conforme aux standards suivants: EN60065, EN55013, EN55020, EN61000-3-2 et EN61000-3-3. D'après les dispositions de la Directive 73/23/EEC, 89/336/EEC et 93/68/EEC. PRECAUTION: Pour déconnecter complètement ce produit du courant secteur, débranchez la prise de la prise murale. [. . . ] "SURROUND" is displayed for 2-channel signal sources recorded in Dolby Surround. OFFSET: Displays the dialog normalization offset value. FLAG: "MATRIX" is displayed if the input signal has undergone matrix processing, "DISCRETE" is displayed if the input signal has undergone discrete processing. 1 Press STANDARD to select "DTS NEO:6". DOLBY PLIIx DTS NEO:6 DHFG 2 Play a program source. 4 Press F G to select the play mode. CINEMA: This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6. 1-channel sources. MUSIC: This mode is suited mainly for playing music. 2 Press [ON SCREEN] again. · OSD-1 OSD-2 OSD-3 OSD-4 OSD-5 ~ 7 OSD-8 ~ 14 : : : : : : 5 STANDARD When "MUSIC" is selected: Press D H to select "CNTR. IMAGE" , then press F G to set. CNTR. IMAGE: The expansion of the center channel can be adjusted. (0. 0 to 1. 0, default : 0. 3) Input signal HDMI monitor information Input/output settings Auto surround mode USER MODE 1 ~ 3 Tuner preset stations 1 DHFG [ON SCREEN] SURROUND PARAMETER ENTER 6 Press ENTER or SURROUND PARAMETER. 3 5 Example: Dolby Digital Example: DTS About the button names in this explanation < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only : Buttons on the main unit and remote control unit (When "MUSIC" is selected) 28 ENGLISH · "OSD-1" "FLAG" is not displayed if there is no FLAG identification signal in the input signal. · OSD-2: The monitor's resolution is displayed when an HDMI monitor is connected to the AVR-700RD. · OSD-4: This is displayed when the auto surround mode is set to "ON" ( page 23) and the input mode is set to "AUTO". This mode can be used to enjoy surround sound with only front speakers or when using headphones. NOTE 1: "5CH STEREO" is displayed when "SB CH OUT" is set to "OFF". NOTE 2: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel (left or right), so input signals to both channels. If you have a source component with only one audio output (monophonic camcorder, etc. ) obtain a "Y" adapter cable to split the mono output to two outputs, and connect to the L and R inputs. · Depending on the program source being played, the effect may not be very noticeable. In this case, try other surround modes, without worrying about their names, to create a sound field suited to your tastes. 32 ENGLISH ENGLISH Basic Operation Basic Operation DSP SIMULATION ENTER SURROUND PARAMETER Selecting the DSP surround simulation 1 Press [DSP SIMULATION]. 7CH STEREO VIRTUAL MATRIX VIDEO GAME MONO MOVIE WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT EFFECT LEVEL: Adjust the strength of the surround effect. DELAY TIME: (MATRIX mode only) Adjust the delay time between "0 ms" and "300 ms". 4 Press ENTER or SURROUND PARAMETER. · Select "Default Yes" and press F to reset all the settings. <7CH STEREO> DHFG The 7CH STEREO mode can be selected directly by pressing <7CH STEREO>. <SURROUND BACK> 2 Press SURROUND PARAMETER. Press 3 set. D H to select the item, then press F G to EFFECT: (WIDE SCREEN mode only) Effect signals with the multi-surround speaker effects are played. When set to "OFF", the SL/ SR channels are played from the SBL/ SBR channels, respectively. LEVEL: (WIDE SCREEN mode only) Adjust the strength of effect signals "1" to "15". DSP SIMULATION DHFG SURROUND PARAMETER ENTER SB CH OUT · ON: Surround back channel played. · OFF: Surround back channel not played. This operation can also be performed using <SURROUND BACK>. ROOM SIZE: Adjust the imaginary size of the recreated sound field space. [. . . ] · Subwoofer's power is not on. · Subwoofer's initial setting is set to "NO". · Subwoofer's output is not connected. · The subwoofer's channel volume level is set to "OFF". [. . . ]