User manual DENON AVR-790

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] · When "HDMI Control" (vpage 57) is set to "ON", HDMI input connector cannot be assigned to "TV". C1 (COAXIAL) / O1 (OPTICAL) Digital Set this to change the digital None : Do not assign a digital input connector to the selected input source. input connectors assigned · At time of purchase, the settings of the different input sources are as to the input sources. BD DVD TV Input source BD DVD TV SAT/CBL GAME SAT/CBL GAME V. AUX DOCK CD Default setting Input source Default setting None V. AUX None None DOCK None OPTICAL 1 CD None COAXIAL 1 None 1 Press ENTER, 2 assigned. then use o p to select the input connector to be 3 Press ENTER to enter the setting. Use uio p to move the highlight to the item you want to set. NOTE If all "HDMI", "Digital" and "Component" assignment of the Game source are set to "None", Game source cannot be selected with the input source selection. 46 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu ENGLISH Input Setup Simple version Setting items Component Set this to change the component video input connectors assigned to the input sources. BD V. AUX DVD DOCK TV GAME SAT/CBL Setting details Comp1 (Component video) None : Do not assign a component video input connector to the selected input source. · At time of purchase, the settings of the different input sources are as shown below. Input source Default setting BD DVD TV SAT/ CBL Component 1 GAME None V. AUX None DOCK None i/p Scaler Convert the input source's resolution to the resolution set at "Resolution". BD z DVD SAT/CBL V. AUX DOCK TV z · "Analog & HDMI" and "HDMI" can be set for input sources for which an HDMI input connector is assigned. · Which items can be set depend on the input source assigned to each input connector. · This function is not effective when the input signal is x. v. Color, 3D, sYCC601 color, Adobe RGB color, Adobe YCC601 color or computer resolution. BD / DVD / TV / SAT/CBL / GAME / V. AUX / DOCK : Select video input source to view. This can be set for individual input sources. "BD", "TV" and "GAME" can be selected only when a component video connector is assigned as an input source. Progressive Mode Set an appropriate progressive conversion mode for the source video signal. BD z DVD SAT/CBL V. AUX DOCK TV z GAME z NOTE · It is not possible to select HDMI input signals. · Input sources for which "Delete" is selected at "Source Delete" (vpage 59) cannot be selected. Auto : Process video automatically based on the HDMI content information. Game : Always process video appropriate for game content. Video Mode Make settings for video processing. BD z DVD SAT/CBL V. AUX DOCK TV z GAME z Aspect Set the aspect ratio for the video signals output to the HDMI. BD z DVD SAT/CBL V. AUX DOCK TV z GAME z Full : Output at 16:9 aspect ratio. "Aspect" can be set when "i/p Scaler" is set to anything other than "OFF". Information Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 47 ENGLISH Input Setup Input Mode Setting items Input Mode Set the audio input modes for the different input sources. Default settings are underlined. Source Level Setting details ­12dB ­ +12dB (0dB) Default settings are underlined. The input modes available for selection may vary depending on the input source. Setting details Auto : Automatically detect input signal and perform playback. [. . . ] Turn off the power to this unit, unplug the USB memory device and then plug it back in. · The USB memory device is not responding. Turn off the power to this unit, unplug the USB memory device and then plug it back in. · The USB memory device is consuming too much power. [. . . ]