User manual DENON DCD-1650R

[. . . ] STEREO CD PLAYER DCD- 1650SR OPERATING INSTRUCTIONS OPEN / CLOSE PEAK AUTOSPACE AUTO EDIT DISPLAY PLAY TIME PAUSE REPEAT STOP RANDOM 1 2 3 DIRECT 4 5 6 PROGRAM B PLAY STOP 7 8 9 INDEX 0 +10 CLEAR CALL 1 2 8 9 POWER ¢ ON £ OFF REMOTE CONTROL UNIT RC-281 DISPLAY TRACK INDEX TIME OPEN/CLOSE PHONES PHONES LEVEL 5 1 , ¤ , / , < >° M S 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 MIN MAX COMPACT DISC PLAYER DCD-1650SR FOR ENGLISH READERS PAGE 5 ~ PAGE 16 ENGLISH IMPORTANT TO SAFETY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] t Clearing the Entire Program · Press the DIRECT button to clear the entire program. The entire program can also be cleared by pressing the 5 OPEN/CLOSE button. · If the DIRECT button is pressed during programmed playback, the program mode is cleared and normal playback continues from that track on. NOTES · If the programming operation is performed in the play or pause mode, the current track is programmed as the first track in the program. Other programs can be added, but the number of programmed tracks and playing time will not be displayed. · Direct search is not possible during programmed playback. Pressing the number buttons adds tracks to the end of the program. · Programming is also possible when the disc holder is open. A track number greater than the number of tracks on the disc can be set in the program, but it will automatically be cleared from the program before playback starts. · The remaining time per track can only be displayed for the first 20 tracks on the disc. · The total program time and remaining program time as well will not be displayed if tracks numbers greater than 20 are programmed. The track is repeated continuously. 1. Press the REPEAT button twice during playback. The REPEAT indicator lights, and if you are at track number 20 or less, that number appears on the calendar display and that track is played repeatedly. · For track numbers 21 and above, the track number is not displayed on the calendar display but the one-track repeat mode will function. · If the REPEAT button is pressed twice in the stop mode, track number 1 appears on the calendar display and one-track repeat is possible. Press the 1 PLAY button to start playback. · Press the REPEAT button once again to cancel the one-track repeat mode. The display and playback return to normal. 10 ENGLISH w Manual Search Reverse DISPLAY (8) Stopping Momentarily During Playback . . . . . . . . . . . . . . . . . . . Pause (Remote control only) · Playback can be stopped momentarily then resumed from the same point. DISPLAY PLAY TIME 1 (6) PAUSE REPEAT STOP RANDOM PLAY TIME PAUSE REPEAT ( 3 PAUSE ) Hold in the manual search reverse button (6). 1 STOP RANDOM Press the 3 PAUSE button. 4th track 5th track 6th track 4th track 5th track (Pause) 6th track Skip Skip Skip Skip Press the 1 PLAY button. · To resume playback, press either the PLAY button or the PAUSE button. (9) Finding a Track While Listening at High Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manual Search (Remote control only) · You can skip through the disk while listening at high speed. [. . . ] Insert two R6P (standard size AA) dry cell batteries with correct polarity as indicated inside battery compartment. · Operate the remote control unit while pointing it towards the remote control sensor on the CD player (see below). OP EN 3. Replace the battery cover. Left 30° Approx. 8 m OP EN Right 30° Notes on the Batteries · The remote control unit uses standard size AA dry cell batteries. [. . . ]