User manual DENON DCD-2000AE

[. . . ] We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Allow for sufficient heat dispersion when installed in a rack. Se till att det finns möjlighet till god värmeavledning vid montering i ett rack. [. . . ] If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries. When operating the remote control unit, point it at the remote control sensor as shown in the figure. The remote control unit can be used from a direct distance of approximately 8 meters. This distance will be shorter, however, if there are obstacles in the way or if the remote control unit is not pointed directly at the remote control sensor. The remote control unit can be operated at a horizontal angle of up to 30° with respect to the remote control sensor. nOTE: · It may be difficult to operate the remote control unit if the remote control sensor is exposed to direct sunlight or strong artificial light. Do not press the buttons on the main unit and on the remote control unit at the same time. If a disc is loaded when the power is turned on, playback starts automatically. Press again to set to the "OFF" position and turn the power off. When pressed while the disc holder is open, the disc holder closes and playback starts. The disc holder can also be closed by pressing the play/pause button !This indicator lights when playing a Super Audio CD. When a CD is loaded or the Super Audio CD's CD layer mode is set, the Advanced AL24 Processing circuit (which reproduces analog waveforms) is activated and this lights. Both the digital output and the display are turned off. In the PURE DIRECT mode, you can't use the DISPLAY button on the remote control unit function. With Super Audio CDs, no digital signals are output. This sensor receives the infrared light transmitted from the wireless remote control unit. For remote control, point the supplied remote control unit RC-997 towards this sensor. Press this button to open and close the disc holder. Press this button to move the pickup forward to the beginning of the next track. Press again to move ahead to other tracks. With Super Audio CDs, no digital signals are output. [. . . ] 2 Moving ahead to the beginning of the next track Press the button more than once to move ahead to the beginning of subsequent tracks. When the 9 button is pressed during random playback, the next track is selected at random and played. 2 Moving back to the beginning of the current track Press the button more than once to move back to the beginning of previous tracks. Finding the desired spot while listening to the sound (Remote control unit only) [Manual search] Use this function to skip forward or backward while listening to the sound. [. . . ]