User manual DENON DN-C680 SERIAL PROTOCOL

[. . . ] Baud rate = 9600 or 19, 200 (CD player and computer must match) (Adjustable within the preset mode) 3. Stop bits = 1 Page 1 *Page 2~14 does not exist DENON, LTD. SOFTWARE SPECIFICATIONS 1. Command List (ASCII Code is used to the commands) Code Scan Command Parameter 1 byte, SCAN mode *(1) Discription Performs the manual search (scan) with the selected direction and speed. (1) A b7 X X X X X X X X 0 1 b6 0 0 0 0 0 0 0 0 X X b5 0 0 0 0 0 0 0 1 X X b4 0 0 0 0 0 1 1 0 X X b3 0 0 0 0 1 0 1 0 X X b2 0 0 0 1 0 0 0 0 X X b1 0 0 1 0 0 0 0 0 X X b0 0 1 0 0 0 0 0 0 X X : Block Repeat : Step 1 Speed (About 2 Times) : Step 2 Speed (About 4 Times) : Step 3 Speed (About 8 Times) : Step 4 Speed (About 12 Times) : Step 5 Speed (About 16 Times) : Step 6 Speed (About 24 Times) : Step 7 Speed (About 32 Times) : Forward : Reverse B D Back Cue End Moitor Send Time Non Non 1 Byte, TIME mode *(1) Returns to the playback start position. [. . . ] Requests the preset information and contents. g h POS code ISRC code Contents of Preset 1 byte, Track Number (Binary) 1 byte, *(1) (1) Request Data Code i b7 0 0 0 0 b6 0 0 0 0 b5 0 0 0 0 b4 0 0 0 0 b3 0 0 0 0 b2 0 0 0 0 b1 0 0 1 1 b0 0 1 0 1 : : : : (1) Requests area No. of the used preset (2) Requests the data of the preset area No. (3) Requests the data of the preset area No. (4) Requests the data of the preset area No. 3. Preset Memory 7 bytes *(1) ~ (7) Performs the set preset. (1) n b7 0 0 0 0 0 0 b6 0 0 0 0 0 0 b5 0 0 0 0 0 0 b4 0 0 0 0 0 0 b3 0 0 0 0 0 0 b2 0 0 0 0 1 1 b1 0 0 1 1 0 0 b0 0 1 0 1 0 1 : : : : : : (1) Changes the using area (2) Changes the set of the preset area No. (3) Changes the set of the preset area No. (4) Changes the set of the preset area No. (5) Requests the write function to the set preset EEPROM. (6) Requests the write function to the set program EEPROM. q Program Repeat 25 bytes 1 byte *(1) Performs the set program. Performs the repeat program. u (1) b7 0 0 b6 0 0 b5 0 0 b4 0 0 Non Non b3 0 0 b2 0 0 b1 0 0 b0 0 : Repeat OFF 1 : Repeat ON Requests the set pitch state. Requests the system status with 2 bytes answer. Cancels the edit, program or preset mode. v x Send Pitch Send Status Canceling Operation 1 byte *(1) z (1) b7 0 0 b6 0 0 b5 0 0 b4 0 0 b3 0 0 b2 0 1 b1 1 0 b0 0 0 : Program mode : Preset mode : Eeprom Work Status Setting A/B Point Non 1 byte *(1) Requests the EEPROM access status. Performs the A/B set time. (1) @ b7 X X 0 1 b6 0 0 X X b5 0 0 X X b4 0 0 X X b3 0 0 X X b2 0 0 X X b1 0 1 X X b0 1 0 X X : : : : A Set Time B Set Time Cancel Set 19 To control the player while attaching the ID (Player Number); 1) Set the Mode at first. [M]-[10001000] After the above, the player accepts commands with ID. [. . . ] (Answer for X and x Commands) Answer for X and X commands. O P Q R S Option Play Manual Search and Scan Ready Search Time 1 byte Answer for H. (1) Track Number (Binary) Non Invalid Command. (Answer for A, B, D, F, I, J, K, M, P, Q, S, T, V, W, Y, n, q, u, z and @ commands). [. . . ]