User manual DENON DP-500M

[. . . ] DP-500M Serial No. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 2. 3. This device complies with Part 15 of the FCC Rules. [. . . ] PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5. OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6. TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7. MAIN SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Please check to make sure the following items are included with the main unit in the carton: (1) Operating instructions (these instructions). . . . . . . . . . . . . . . 1 (2) Turntable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (3) Turntable sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (4) Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (5) 45 rpm record adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (6) Head shell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (7) Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (8) Dust cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (9) Connecting cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. PART NAMES AND FUNCTIONS c START/STOP button Press this button to start and stop the turntable. v Lock nut · Use this to install the head shell. b Tone arm n Arm rest · This is the tone arm support. m Lifter lever · Use this to lift and lower the tone arm. , ANTI-SKATING knob · When the record is playing, a force is generated drawing the stylus towards the center of the record. Set this knob to the same value as the stylus pressure to offset this force. z Power button (£OFF, ¢ON) · When the power is switched ON, the orange LED of the speed selector button is illuminated. The orange LED is illuminated at 33-1/3 rpm and the green LED at 45 rpm. . Stylus pressure adjustment ring · Use this to adjust the stylus pressure. /0 Counterweight · Use this to balance the tone arm and to adjust the stylus pressure. x Speed selector button (33-1/3: Orange LED lights up. 45: Green LED lights up. ) · Set this button according to the record's playing speed. For 33-1/3 rpm records . . . . . . . . . . . . . . 33 For 45 rpm records . . . . . . . . . . . . . . . . . . . . 45 /1 Dust cover · Use this to protect important records from dust and dirt. Keep the dust cover closed when not using the player. 3 2. ASSEMBLY · Do not plug in the power cord until assembly is completed. (1) Mounting the turntable Turntable sheet (3) Mounting the cartridge · The cartridge is not included. 1 Mount your cartridge on the head shell. · The head shell's lead wires are color-coded. [. . . ] · This provides the proper anti-skating force. AN T KATING I-S 3 Adjust the horizontal balance. · Move the counterweight forward or backward so that the tone arm is parallel to the turntable's surface when the tone arm is released. Set parallel 0 · When adjusting the horizontal balance, be careful that the stylus does not touch the turntable sheet or the main unit. 4 Set the tone arm back on the armrest. Set the tone arm back on the armrest. 1 2 3 2. 0 the counterweight with a finger so that it does not move, then turn the stylus pressure adjustment ring so that the back center line on the back of the tone arm is at "0". 0 3 . 5 . 5 0 3. 0 1. 0 . 5 2 1 . 5 5 4. CONNECTIONS · Be sure to turn off the amplifier's power when making connections. Use the included connecting cords to connect the left(L) and right(R) output terminal (PHONO OUT) to the amplifier's PHONO L and R input terminals. 1 R L OUTPUT R L 2 Connect the ground wire (with the output cords) to the amplifier's GND (ground) terminal. Amplifier R L 3 Plug the power cord into an AC120V power outlet. · If the amplifier or another component includes a power outlet, it can be used, but first check in the amplifier's manual that there is sufficient power capacity. 5. [. . . ]