User manual DENON DRR-F100

[. . . ] Allow for sufficient heat dispersion when installed on a rack. Se till att det finns möjlighet till god värmeavledning vid montering i ett rack. Keep the set free from moisture, water, and dust. We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. [. . . ] Cassette tapes are equipped with accidental erasure prevention tabs. To protect recordings from being erased accidentally, use a screwdriver, etc. To record on a cassette tape whose tabs have been broken off, cover the holes with cellophane tape, etc. Press this button to fast-forward the front side of the tape. ) Also use this button to search for the beginning of the following selection when playing in the forward (1 ) direction, or to search for the beginning of the current selection when playing in the reverse (0) direction. When playing a tape, set the Dolby NR mode to the same mode as when the tape was recorded. This lights during system synchronized recording of a CD. Press this button while the tape is moving to stop the tape. Do not place cassette tapes in the following places: 1. Store cassette tapes in cases with stoppers to prevent the tape from becoming slack. A commercially available head cleaning cassette (wet type) is required to clean the heads (recording/playback and erasing) on this product. In this mode, when the end of the front side of the tape is reached during recording or playback, the tape automatically switches to the back side and playback or recording continues. (The stop mode is set automatically when the end of the tape on the back side is reached. * When started from the back side, only the back side is recorded or played. If a foreign object is caught in the cassette tray during closing, simply press the OPEN/CLOSE button again and the tray will open. Do not press the cassette tray in by hand when the power is off. Do not place foreign objects in the cassette tray. Single-sided recording/playback mode ( ) Use this to record or play only the front or back side. Example 1: Finding the beginning of the 4th selection on side A while playing the 1st selection. Example 2: Finding the beginning of the 2nd selection on side A while playing the 4th selection. Load the cassette tape you want to play. Load the cassette tape with side A facing up. [. . . ] In some cases it may not be possible to record all the tracks on the disc, even if the tape is longer than the disc`s recorded time (because of how the tracks are divided onto sides A and B of the tape). The "OVER" indicator on the CD player flashes if there are tracks that cannot be recorded. Recording button (REC), 6 7 button, CD SRS button, DIRECTION button and OPEN/CLOSE button will not function during editing. When recording using the editing function, the CD player`s auto space function is activated and blank spaces of approximately 4 seconds are automatically created between tracks. [. . . ]