User manual DENON DVD-2500BTCI

[. . . ] Read Instructions - All the safety and operating instructions should be read before the product is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Follow Instructions - All operating and use instructions should be followed. Cleaning - Unplug this product from the wall outlet before cleaning. [. . . ] â· Slow reverse is not available. Available repeat function may vary depending on the discs. 1) During playback, press [REPEAT] repeatedly until desired repeat mode appears on the screen. The following repeat modes are available. Repeat mode Available media Chapter repeat The current chapter will be played back repeatedly. Title repeat The current title will be played back repeatedly. Track repeat The current track or file will be played back repeatedly. Group repeat The current folder will be played back repeatedly. All repeat All titles, tracks or files in the media will be played back repeatedly. This function plays back approximately at 1. 3 times of normal playback with sound being output. This function is available only on discs recorded in the Dolby Digital format. 1) During playback, press [MODE] repeatedly until the dialog speed setting appears. Every time you press C, the setting will be turned "Off". â· Subtitle can be viewed during this function. â· Picture control, and audio language setting cannot be changed during this function. â· Virtual surround does not function during this function. â· This function may not work at some points on a disc. â· During this function, 2ch LPCM sound will be output. Desired section can be played back repeatedly. About the button names in this explanation < >: Buttons on the main unit [ ] : Buttons on the remote control Button name only: Buttons on the main unit and remote control The chapter/title/track/group repeat setting will be cleared when moving to other chapter, title, track/file or folder. â· Repeat playback does not function during A-B repeat playback. [. . . ] After confirmation message appears, use [ / ] to select "Yes", then press [ENTER]. If the unit does not perform properly when operated as instructed in this Operating Instruction, check the unit, consulting the following checklist. - Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again. ) - Check whether the connected display device or other device supports HDCP. [. . . ]