User manual DENON DVD-A1

[. . . ] We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Allow for sufficient heat dispersion when installed on a rack. Keep the set free from moisture, water, and dust. Unplug the power cord when not using the set for long periods of time. [. . . ] FEET (when the 1 cursor button is pressed): The unit of distance is set to feet ("ft"). When "FRONT Lch", "FRONT Rch", "CENTER", "SURROUND Lch", "SURROUND Rch", "SUBWOOFER" is selected: Use the 0 and 1 cursor buttons to set the distance from the listening position to the different speakers. The distance can be set within the range of 0 to 60 feet (18 meters). The maximum difference in speaker distance for which adjustment is possible is 15 feet (4. When "DEFAULT" is selected: When "DEFAULT" is selected and the ENTER button is pressed, all the items are restored to their factory default settings. When digital connections are made with an AV amplifier, make the speaker settings on the AV amplifier. For DVD audio discs, the disc's settings are given priority, so the sound may not be produced as set with the above speaker mode setting. The volume level output from the front speakers (left and right channels), center speaker, surround speakers (left and right channels) and subwoofer can be adjusted. The volume level can be adjusted between 0 and -10 dB in steps of 1 dB. W When "DIGITAL OUT" is selected: NORMAL (Factory default) When playing DVDs recorded in Dolby Digital or DTS, bitstream signals are output from the digital audio output terminals. When playing DVDs recorded in linear PCM or packed PCM, linear PCM signals are output. Select "NORMAL" when making digital connections to an AV amplifier with built-in Dolby Digital and DTS decoder. PCM When playing Dolby Digital/DTS bitstream signals or DVDs recorded in linear PCM or packed PCM, the signals are converted into 48 kHz/16-bit PCM (2-channel) signals and output from the digital outputs. When playing DVDs recorded in PCM, linear PCM signals are output. 1 kHz / 48 kHz)" is selected: OFF (Factory default) When playing linear PCM or packed PCM DVDs that are not copyright-protected, for 2-channel PCM audio signals up to 96 kHz, linear PCM signals are output as such without being converted from the digital outputs. ) PCM signals of 48 kHz/16 bits and lower are output, regardless of whether they are copyrightprotected or not. For DVDs containing multi-channel PCM signals, the digital signals are down-mixed for output into two channels, front left and right. (Only the front left and right channels are output for sources for which down-mixing is prohibited. ) When playing copyright-protected linear PCM or packed PCM DVDs, in consideration of copyrights, no digital signals are output for sources exceeding 48 kHz/16 bits. When playing such sources, either set to "ON" or make analog connections. (The PCM digital audio output signals are converted to 48 kHz or less in consideration of copyrights. ) When making digital connections to an AV amplifier that is not compatible with 96 kHz/88. [. . . ] Sound is not produced or sound quality is poor. Picture is disturbed during the search operation. Some operations are disabled for some discs. Subtitles are not displayed for DVDs not containing subtitles. [. . . ]