User manual DENON RC 1242

[. . . ] Accessories Inserting the battery Operating range of the remote control unit features Part names and functions Sound bar Subwoofer Remote control unit 5 Enjoying television, movies and music Pairing a Bluetooth device for the first time Listening to music with a paired Bluetooth device Turning off the sound temporarily Incompatible with the ARC / TV equipped with an optical digital connector Connection 3: TV equipped with an HDMI connector and incompatible with the ARC / TV equipped with an analog connector Automatically setting to standby (Auto standby function) Reducing the standby power consumption (Deep standby function) Operating this unit using the remote control of a TV Power does not turn on / Power is turned off Operations cannot be performed through the remote control unit 32 No sound comes out The HDMI Control function does not work Music from the Chromecast cuts out or delays sometimes Thank you for purchasing this Denon product. To ensure proper operation, please read this owner's manual carefully before using the product. After reading this manual, be sure to keep it for future reference. accessories Check that the following parts are supplied with the product. [. . . ] The status display LED lights up in blue and this device and the Bluetooth device are paired. 2 Press g to switch the input source to "Bluetooth". 3 Activate the Bluetooth settings on your Bluetooth device. 4 Push g on this device until the status display LED blinks in blue. 5 Select "DHT-S416" (Default) from the list of devices displayed on the screen of the Bluetooth device. The status display LED lights up in blue and this device and the Bluetooth device are paired. 0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th Bluetooth device is paired, it will be registered in place of the oldest registered device. Listening to music with a paired Bluetooth device 1 Press c to turn on power to the unit. 2 Press g to switch the input source to "Bluetooth". 3 Activate the Bluetooth settings on your Bluetooth The status display LED lights up in blue and connects to the last Bluetooth device connected. If the connection is cut, perform connection again. 5 Play music using any app on your Bluetooth device. The status display LEDs change to the volume display when these buttons are pressed. Each time a volume button is pressed, the volume LEDs blink and the number of LEDs that are blinking increases or decreases according to the volume that is set. The volume LEDs blink three times when the maximum or minimum volume is reached. The number of LEDs that are blinking increases or decreases according to the subwoofer volume that is set. The volume LEDs blink three times when the maximum or minimum subwoofer volume is reached. 1 Press the listening mode button to select a listening mode. When the button is pressed, the rightmost status display LED flashes and the listening mode changes. Compresses the dynamic range (difference between loud and soft sounds) to make audio easier to hear at low volumes. enjoy the full presence of a wide , encompassing acoustic field. [. . . ] 0 Check that the HDMI Control function setting is enabled on all devices connected to this unit. Music from the Chromecast cuts out or delays sometimes Music cuts out or delays sometimes 0 Make sure your Internet connection is operating correctly. If you are sharing your network with other users or devices, they may be using most of your bandwidth (especially if they are streaming video). 0 Make sure the sound bar is within range of your wireless network. [. . . ]