User manual DENON RCD-M35DAB

[. . . ] CD RECEIVER RCD-M35DAB RCD-M33 OPERATING INSTRUCTIONS NOTE ON USE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Allow for sufficient heat dispersion when installed on a rack. · Keep the set free from moisture, water, and dust. [. . . ] Program Types To set the RT mode, press the TIME/ DISPLAY button on the remote control unit until "Radio Text" scrolls on the display. 1 (News) (Affairs) (Information) (Sports) (Education) (Drama) (Culture) (Science) (Varied) (Pop Music) (Rock Music) (Easy Listening) (Light Classical) (Serious Classical) (Other Music) (Weather & Meteorological) (Finance) (Children`s Programs) (Social Affairs) (Religion) (Phone In) (Travel & Touring) (Leisure & Hobby) (Jazz Music) (Country Music) (National Music) (Oldies Music) (Folk Music) (Documentary) 2 When the station currently tuned in is offering a radio text message service, the message scrolls on the display. Scrolling display · When the RT mode is turned on while an RDS radio station not offering an RT service is tuned in, "NO TEXT" is displayed on the display, then the mode automatically switches to the PS mode. · In the same way, the mode automatically switches to the PS mode when the RT service is finished. In this case, the mode automatically switches from the PS mode back to the RT mode when an RT broadcast is resumed. · The RT mode cannot be set in the AM band or for FM stations not offering RDS broadcasts. · To turn the RT mode off, press the TIME/ DISPLAY button and switch to the desired display mode. 14 10 LISTENING TO DAB (Check the connections on pages 4, 5. ) Tuning in DAB (Digital Audio Broadcasting) Presetting the station that is currently tuned in Up to 60 DAB stations can be tuned in. 1 Press the power operation switch to turn on the power. Main unit Remote control unit 1 Follow steps 1 to 6 under "Tuning in DAB (Digital Audio Broadcasting) broadcasts" to tune in the station you want to preset. 2 Press the FUNCTION or TUNER button to select TUNER mode. Main unit Remote control unit 2 Use the ENTER/MEMO button to enter the station to be preset. Remote control unit 3 Press the 2 /BAND button to select DAB. Main unit Remote control unit 3 Use 9/ 8 buttons to select the preset number at which the station is to be registered. · Preset numbers at which stations are already registered are also displayed. Be careful not to accidentally overwrite previously registered stations. 4 Press the MENU/ SET button for at least 2 seconds. Main unit Main unit Remote control unit Remote control unit 5 Use the MENU/ SET button to start automatically scanning. · Use 9/ 8 buttons to select "AUTO SCAN" (from between "AUTO SCAN" When 30 broadcast stations were Main unit and "DAB INITIALIZE"). found · When the operation is performed for the first time, scanning starts automatically. · When the MENU/SET button is pressed for over 2 seconds while in the standby mode, the "DAB SCAN AREA" menu is Remote control unit The first station is displayed, and the auto scan range can be selected tuned in. I ALL BAND II (5A ~ 13F) UK ONLY (11B ~ 12D) · When auto scanning is completed, the number of broadcast stations is displayed, then the first station is The display in this section tuned in. If "NO STATION" is displayed, check the can be changed using the antenna's connection. (See page 4. ) TIME/DISPLAY button. · <DAB INITIALIZE> is used to clear the preset values of the registered broadcast stations. Use the tuning buttons (TU+ and TU-) to select the broadcast station. · Broadcast stations are selected in the scanned order. They can be resorted in alphabetical order using the DAB/RDS button. (See "DAB Settings" on page 16. ) 4 Use the ENTER/MEMO button to register the station at that preset number. · Once stations are registered, they can be called out using 9/ 8 buttons. Remote control unit NOTES: The function of the +/­ button on the main unit may toggle between Tuning +/­ and Preset +/­ functions. · Pressing the ­ button while holding down the BAND button at the same time changes function of the +/­ button to Tuning +/­. ("TUNING" flashes for 5 seconds. ) · Pressing the + button while holding down the BAND button at the same time changes the function of the +/­ button to Preset +/­. ("PRESET" flashes for 5 seconds. ) · The +/­ button is factory preset to function as a Tuning +/­ button. 6 Main unit Remote control unit 15 Switching the DAB information display DAB Settings 1 Follow steps 1 to 6 under "Tuning in DAB (Digital Audio Broadcasting)" on page 15 to tune in a DAB station. Use the DAB/RDS button to make the DAB settings. Remote control unit Use the TIME/DISPLAY button to switch the DAB reception information on the bottom line of the display. The display switches as follows each time the TIME/DISPLAY button is pressed: qTuning Aid Remote control unit The reception sensitivity of the frequency that is currently tuned in is displayed. [. . . ] · Set the control to an appropriate Position. · Connect the speaker cords properly. 7 7 5, 6 5 Receiver section No treble sound is produced, or the position of the instruments is unclear. CD player section Wow & flutter: Sampling frequency: Optical source: Analog Audio Output: Clock, Timer section Clock system: Clock precision (per month): Timer functions: A source other than the · Function is not properly set. · Signals from the broadcast station are weak. · Noise from a TV or interference from a broadcast station. · Set the desired function using the FUNCTION button. [. . . ]