User manual DENON TU-1800DAB

[. . . ] AM-FM STEREO/DAB TUNER TU-1800DAB OPERATING INSTRUCTIONS 2 SAFETY PRECAUTIONS · DECLARATION OF CONFORMITY We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC Directive. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. A NOTE ABOUT RECYCLING: This product's packaging materials are recyclable and can be reused. [. . . ] Either turn the TUNING/PRESET knob or press the CHANNEL/CONTROL button to display "RDS". Press the TUNING/PRESET knob or ENTER button to set the RDS search selection mode. Either turn the TUNING/PRESET knob or press the CHANNEL/CONTROL button to display "PTY Search". TP search Use this function to find RDS stations broadcasting traffic programme (TP). 1 2 3 4 5 6 Press the MENU button to select menu. Either turn the TUNING/PRESET knob or press the CHANNEL/CONTROL button to display "RDS". Press the TUNING/PRESET knob or ENTER button to set the RDS search selection mode. Either turn the TUNING/PRESET knob or press the CHANNEL/CONTROL button to display "TP Search". Press the TUNING/PRESET knob or ENTER button to set the PTY search selection mode. Watching the display, turn the TUNING/ PRESET knob or press CHANNEL/CONTROL button to call out the desired programme type. When receiving an RDS station, its programme type is displayed first. When not receiving an RDS station, "PTY" flashes. Press the TUNING/PRESET knob or ENTER button to set the TP search standby mode. 7 8 Press the TUNING/PRESET knob or ENTER button to set the PTY search standby mode. Either turn the TUNING/PRESET knob, press the CHANNEL/CONTROL button. · To automatically begin the TP search operation. · The RDS LED flashes. Either turn the TUNING/PRESET knob, press the CHANNEL/CONTROL button. · To automatically begin the PTY search operation. If there is no station broadcasting the designated programme type above operation, all the reception bands are searched. The station name is displayed on the display after searching stops. If no TP station is found with above operation, all the reception bands are searched. The station name is displayed on the display after searching stops. 7 If no other TP station is found when all the frequencies are searched, "NO Programme" is displayed. 15 Operation MENU MENU DISPLAY TUNING/PRESET DISPLAY CHANNEL/ CONTROL ENTER RT (Radio Text) Switching RDS information display 1 2 3 4 5 6 7 Press the MENU button to select menu. Either turn the TUNING/PRESET knob or press the CHANNEL/CONTROL button to display "RDS". Press the TUNING/PRESET knob or ENTER button to set the RDS search selection mode. Either turn the TUNING/PRESET knob or press the CHANNEL/CONTROL button to display "RT ON/OFF". 1 2 Use the procedure described at "Auto tuning", "Manual tuning" or "Recalling preset stations" to tune in a frequency with an RDS station. Press the DISPLAY button to switch the RDS reception information. The display switches as shown below each time the DISPLAY button is pressed. q STATION NAME : Only displayed when the search mode is set to PRESET and the station name has been registered. w PS : The programme service name and frequency of the station tuned in is displayed. Press the TUNING/PRESET knob or ENTER button to set the RT ON/OFF selection mode. Either turn the TUNING/PRESET knob, press the CHANNEL/CONTROL button to choose the "RT ON" or "RT OFF". The above is an example for when there is TP data but no RT data. e PTY : The programme type of the tuned in broadcast is displayed. Press the TUNING/PRESET knob or ENTER button to set whether to enable or stop the RADIO TEXT function. If no text data is being broadcast, "NO TEXT DATA" is displayed. r CT : The current time is displayed. 16 · When the "STATION NAME" is not registered, q is not displayed. Operation Registering station names (FM/AM only) 7 8 Press the TUNING/PRESET knob or ENTER button for at least 2 seconds. · The station name is set. 1 2 3 4 5 6 Use the procedure described at "Auto tuning", "Manual tuning" or "Recalling preset stations" to tune in the desired frequency. Example: To register "DENON" as the FM station name at preset channel "A2". Use the procedure described at "Preset stations (FM/AM)" step 5 ~7 ( page 12) to register the displayed station name at "A2". This procedure can be used to registered station names with up to 8 digits for up to 100 AM/FM stations at random. The 63 characters below can be selected. ABCDEFGHIJKLMNOPQRSTUVW XYZ0123456789[\]^_!"#$%&'() * + , ­ . (space) Press the MENU button to select menu. Either turn the TUNING/PRESET knob or CHANNEL/CONTROL button to display "Station Name". Press the TUNING/PRESET knob or ENTER button to display the Station Name setting. While "_" is flashing, either turn the TUNING /PRESET knob or press the CHANNEL/CONTR OL button to display "D". [. . . ] Hissing or buzzing sound is heard on AM broadcasts. Booming sound (humming) is heard in AM broadcasts. Cause Measures Page 9 · Power supply cord's plug is not plugged in to · Plug the power supply cord in properly. · Antenna cable is not properly connected. · Antenna is not pointing in the right direction. [. . . ]