User manual DENSION AUDIO SYSTEMS ICELINK PLUS 2.0

[. . . ] For st details see the Operating modes section and owners of 1 or nd 2 generation iPod models may disregard all the references to the ice-Link Menu and other advanced features. This manual assumes that ice>Link Plus is already installed in your vehicle. For assistance with installation please refer to the installation guide. On the last page of this manual you will find help on installing the cradle mounting only. [. . . ] select Disc#6 Next/Back track Fast Forward (FF) Rewind (RW) select Disc#1-5 6 Main Menu Options Playlists Main Menu Main Menu Options Setup ice>Link Main Menu ice>Link setup menu allows you to set the iPod to best suit your car, radio specific environment, and your personal preferences. Enter this submenu by activating FF. BMW Special Functions BMW Special. . . Troubleshooting Troubleshooting Mounting the ice>Link Plus Cradle Assemble the base of the iPod Cradle with an optional vehicle specific adapter. An optional adapter is not required, however it is recommended for easy and damage-free installation. Mounting. . . ice>Link Plus supports direct access to the first 5 playlists stored on the iPod by selecting Disc#1-5. More playlists (as many as you like) or the overall content of the iPod can be selected in the ice>Link Menu's playlist browser. Enter the Menu Navigate and scroll in Menu Select the highlighted option Return to the previous level Exit the Menu The BMW variant of ice>Link Plus enables the display of ID3 information on a wide range of BMW head units. Due to variations in head units, ice>Link Plus must be configured to match your combination of car & head unit. To do this, enter the ice>Link Plus menu (select Disc#6) and chose Setup and then Text selector. Setup / Text selector 3 Entering the browser you can navigate and scroll with the Next/Back functions and start the highlighted playlist with FF. Selecting the name of your iPod starts playing all the songs stored in the iPod. Language You can select your preferred language by repeated activation of FF function. ice>Link will send the "Select CDx" text to all supported car & head unit display surfaces (Navigation Screen, Multi Information Display and Business Radio display) - for 30 seconds. To select the display used for ID3 information display press the relevant Disc# button shown in the text displayed on the surface. "Accepted. . . " message on the device will confirm selection. When using BMW text display, the ice>Link Plus menu will be displayed on the head unit display instead of on the iPod screen. You can disable text display in the Setup menu at any time. If no "Select CDx" message is displayed, this feature is not supported with the present firmware version on your head unit. In this case wait 30 seconds or exit setup by pressing the button. Using the BMW text display the ice>Link Plus supports two more browser options in the Main Menu: Artists and Albums. Additional notes: If no target display surface is selected during 30 seconds, the "Select CDx" message will stay on the display. Do not change source during the selection period, this will cancel the selection. Use the BMW_Text_nothing. mp3 config file to disable text display. This can be helpful if you made a wrong selection and nothing is displayed. Certain head units require a double keypress for normal operation. The first press erases the text from the display; the second sends the command. [. . . ] If you wait for 10 seconds and then reinsert the iPod, ice>Link will retain iPod user interface mode, so you can control the iPod directly from its keypad. To return to Dension user interface mode select Disc#6 and wait for the Dension logo. Please note, that re-establishing data connection with the iPod may take up to 20 seconds. If the connection still fails, please disconnect iPod and power cycle the radio. [. . . ]