User manual DEXAPLAN FA 602 10-2006

[. . . ] Use protective gloves if the batteries have leaked or are damaged. Q W Avoid damage to property: · · · · · Avoid bringing the device into contact with moisture as this may cause damage. When inserting the batteries, be sure to observe the correct polarity. When not using the device for extended periods of time, remove the batteries. The device must be battery-operated only. [. . . ] Note: The efficiency of the magnet can be reduced on metallic doors or windows. In this case, reduce the distance between the magnet W and the alarm unit Q. T52_FA602_GB. indd 1-3 24. 10. 2006 15:55:28 Uhr It is important that there are no appliances with electromagnetic fields near to the alarm, e. g. radio telephone, radio set or electric motor. These could have an effect on the alarm function. Troubleshooting Fault Alarm sounds although windows / door are closed. Warranty / Service Cause The distance between the magnet and the magnet switch is too large (or the arrow is pointing in the wrong direction). - The batteries are inserted with the wrong polarity. - The arrow on the magnet is not pointing to the mark on the alarm unit. Remedy Reduce the distance. Warranty This device has a warranty of 3 years from the date of purchase. The device was manufactured with care and inspected thoroughly before delivery. Please keep your receipt as proof of purchase. If you have a claim under the warranty, please contact the service office for your country. This is the only way to ensure that your device can be sent in free of charge. This warranty is only valid for the first purchaser and is not transferable. The warranty furthermore covers material or manufacturing defects only. It does not apply to wear parts or damage to fragile parts, e. g. The product is solely intended for private use and not for commercial use. No claim for damages may be made in the event of a burglary. An alarm is no substitute for insurance cover and does not replace your duty of care. In the event of incorrect and / or improper handling, the use of force or any work on the device that is not performed by the service office, the warranty shall expire. This warranty does not restrict your statutory rights. Installing the alarm unit Attention!Do not drill or screw any additional screws into the housing of the alarm unit Q or the magnet W for installation purposes. o Use the supplied adhesive strips to fix the alarm unit Q and the magnets W. o Place the alarm unit Q at the edge of the window or door handle side (see also Fig. o Place the magnets W on the window or door frame (see also Fig C). [. . . ] Place the new batteries in the correct positions. The correct polarity is indicated in the battery compartment. Push the battery compartment cover E back onto the alarm unit Q. Note: always change all three batteries at the same time. [. . . ]