User manual DEXAPLAN MC 610

[. . . ] Page 7 8 9 9 9 9 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Rectifying faults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Otherwise there is a danger to life! Pl Be wh Ex Ch ins o m Attention!· Operate the camera with 9 V DC only!Check before connecting the mains adapter to the mains that the electricity supply circuit is 230 V ~ AC, 0 Hz and is fitted with a max. · Protect the camera and cable from strong magnetic or electric fields!· Do not place the device near fire, heat, or subject it to prolonged high temperatures!· Protect the device from violent mechanical loads and vibrations!· Use the device only with the supplied original parts or original accessories!· Before assembling and bringing the device into use check the supplied items for damage and completeness!If in doubt ask your customer service centre. Repairs and interference with the device may only be carried out by trained specialists. · Use a dry or slightly moist cloth for cleaning the device. Never immerse the device in water. o o o KOE27_T02_Content. indd 6 Planning where you install the device / Assembly and installation Planning where you install the device Before you install the camera you must first plan what to do at the installation site. B Check that the camera works satisfactorily at the installation site before you install it. Observe the following points: o The camera should be attached in such a way that as little direct light or direct sunlight as possible strikes the lens. When considering this, remember that the position of the sun does not remain constant. The camera image is best checked before it is installed. To do this set the camera operating and hold it in the planned position. If necessary alter the position of the camera until you obtain your desired picture coverage. o The camera has an infrared light for the adjacent area for better facial recognition. Additional lighting in the area at night will improve the image quality from the camera. o If you wish to install the camera outside a building please remember that it must be possible to provide a cable feed hole to the installation site. The installation site should if possible be sheltered from rainfall. [. . . ] This guarantee does not limit your statutory rights. Inf can In t cen ( Mo obt pro Maintenance Disconnect the mains adapter from the mains before carrying out any maintenance or cleaning on the device. o You should regularly check the device to see that it is safe and working properly. o Use a soft cloth and some mild cleaning agent or weak soap solution to clean the surface of the camera housing. o Never use petrol, thinners or similar chemicals. o Disposal Dispose of packaging materials and worn out devices at a local authority approved disposal facility. [. . . ]