User manual DEXAPLAN SL 614 10-2006

[. . . ] If it is to be used outdoors, a weatherproof housing should be used for the lamps. Any use of the device other than that described below, or any modification to the device, is not permitted and may result in hazards such as injuries and technical malfunctions (e. g. short-circuit, fire, electric shock) or damage. Fields of Application and Function The light controller could help to deter burglars by indicating that you are at home by switching lights on and off automatically. To this purpose the light controller is screwed into the lamp socket and afterwards the illuminant into the light controller. [. . . ] It is essential to ensure that the device does not come into contact with water or moisture. Otherwise there is a danger of electric shock, fire or death!The device should only be cleaned with a dry or slightly damp cloth, keeping the bayonet cap and socket dry. Otherwise there is a danger of electric shock or death. The device should not be left in the hands of children. GB/IE T Requirements The light controller should be used with a light socket with a bayonet socket and an appropriate illuminant which also has a bayonet cap. 00 W (in the case of closed lampshades max. 3 W The following illuminants should not be used: o Lamps controlled by a dimmer switch o Lights recessed into the ceiling, flicker and glow lamps · · · · · · GB/IE KOE30_T32_Content. indd 1-2 30. 10. 2006 15:56:21 Uhr Installation (see diagram) o Before installation please turn off the light. o Before installation please turn off the power supply. o Unscrew the existing bulb from the socket Q. o Insert the light controller E with the bayonet cap W into the lamp socket Q and turn in a clockwise direction. o Insert the bulb T into the socket R and turn in a clockwise direction. Troubleshooting Fault There is no confirmation, the set function does not work properly or not at all. Cause The desired function has not been activated properly. Correction - Turn the light off. - Turn on the desired function as described under , , Operation". c Danger!It is possible that when the light controller is used the distance to combustible materials such as a lamp shade etc. Please ensure that there is sufficient safety clearance!If the lamp shade is closed the maximum power of the bulb must be 60 W!Open lamp shade Cleaning Please ensure the following before cleaning o First of all, turn off the power supply. o Then remove the bulb T from the socket R. o Now remove the light controller E from the lamp socket Q. o Only now should you clean the light controller. o Please use a dry or slightly damp cloth (that has been soaked in a mild soapy water solution if necessary) to clean the light controller. Petrol, thinning agents or similar chemical substances should not be used. [. . . ] Please retain the sales voucher as proof of purchase. In the event of a claim under the guarantee please telephone the service centre for your country to ensure that your goods can be returned at no cost. This guarantee applies to the original purchaser only and is not transferable. Furthermore, the guarantee is restricted to defects in material and manufacture only. [. . . ]