User manual DFI GF9400 T2RS

[. . . ] System Board User's Manual Copyright This publication contains information that is protected by copyright. No part of it may be reproduced in any form or by any means or used to make any transformation/adaptation without the prior written permission from the copyright holders. This publication is provided for informational purposes only. The manufacturer makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. [. . . ] Transmits and receives data simultaneously. 3 PWRON After PWR-Fail Off When power returns after an AC power failure, the system's power is off. You must press the Power button to power-on the system. When power returns after an AC power failure, the system will automatically power-on. On 69 3 BIOS Setup USB Device Setting Phoenix - AwardBIOS CMOS Setup Utility USB Device Setting USB 1. 0 Controller USB 2. 0 Controller USB Operation Mode USB Keyboard Function USB Mouse Function USB Storage Function Enabled Enabled High Speed Enabled Enabled Enalbed Item Help Menu Level [Enable] or [Disable] Universal Host Controller Interfacefor Universal Serial Bus USB Operation Mode *** USB Mass Storage Device Boot Setting *** : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults The settings on the screen are for reference only. Your version may not be identical to this one. USB 1. 0 Controller This field is used to enable or disable the Universal Host Controller Interface (USB 1. 0). USB 2. 0 Controller This field is used to enable or disable the Enhanced Host Controller Interface (USB 2. 0). USB Operation Mode This field is used to select the USB's operation mode. High Speed If the USB device is a high speed device, it will operate in high speed mode. If it is a full/low speed device, it will operate in full/low speed mode. Regardless of the speed of the USB device, it will always operate in full/low speed mode. Full/Low Speed 70 BIOS Setup USB Keyboard Function Due to the limited space of the BIOS ROM, the support for legacy USB keyboard (in DOS mode) is by default set to Disabled. With more BIOS ROM space available, it will be able to support more advanced features as well as provide compatibility to a wide variety of peripheral devices. If a PS/2 keyboard is not available and you need to use a USB keyboard to install Windows (installation is performed in DOS mode) or run any program under DOS, set this field to Enabled. USB Mouse Function Due to the limited space of the BIOS ROM, the support for legacy USB mouse (in DOS mode) is by default set to Disabled. With more BIOS ROM space available, it will be able to support more advanced features as well as provide compatibility to a wide variety of peripheral devices. If a PS/2 mouse is not available and you need to use a USB mouse to install Windows (installation is performed in DOS mode) or run any program under DOS, set this field to Enabled. USB Storage Function This field is used to enable or disable the support for legacy USB mass storage. 3 71 3 BIOS Setup Power Management Setup The Power Management Setup allows you to configure your system to most effectively save energy. Phoenix - AwardBIOS CMOS Setup Utility Power Management Setup ACPI AWAY Mode ACPI Suspend Type Power Management HDD Power Down HDD Down In Suspend Soft-Off By PWR-BTTN WOL (PME#) From Soft-Off S5 Resume by USB Power-On by Alarm x Date Of Month Alarm x Time (hh:mm:ss) Alarm HPET Support Disabled S1 (POS) User Define Disabled Disabled Instant-Off Disabled Disabled Disabled 0 11 : 0 : 0 Enabled Item Help Menu Level : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults The settings on the screen are for reference only. Your version may not be identical to this one. ACPI Away Mode When enabled, this new feature of WinXP MCE 2005 allows the computer to appear off to the user while it continues to perform tasks that do not require user input. ACPI Suspend Type This field is used to select the type of Suspend mode. S1(POS) S3(STR) Enables the Power On Suspend function. Enables the Suspend to RAM function. 72 BIOS Setup Power Management This field allows you to select the type (or degree) of power saving by changing the length of idle time that elapses before the Suspend mode and HDD Power Down fields are activated. Min Saving Minimum power saving time for the Suspend Mode (1 hour) and HDD Power Down (15 min. ) Maximum power saving time for the. Suspend Mode and HDD Power Down = 1 min. Allows you to set the power saving time in the "Suspend Mode" and "HDD Power Down" fields. 3 Max Saving User Define HDD Power Down This is configurable only when the Power Management field is set to User Define. [. . . ] Remove all USB devices including the USB keyboard and instead use a PS/2 keyboard to test. Assigning memory & I/O resource searching for a valid VGA device & VGA BIOS then placing it in C000:0. (Clock-gen circuit / Super IO Disabling respective clock resource circuit) to empty PCI & DIMM slots. Initializing onboard H/W monitor devices. [. . . ]