User manual DICOTA BLUESTAR

[. . . ] Your BlueStar mouse uses a new generation technology ­ invisible 1600 dpi laser sensor that replaces and accurately scans the surface 20 times more sensitive than the traditional LED optical sensor. You can work with your BlueStar mouse in most surfaces smoothly. The stylish & comfortable design provides you with the best way to work with your Notebook or PC. This product complies with IEC 60825-1, class 1 laser product. [. . . ] You can find the Bluetooth mouse in the "Devices" tab when it is connected. The red LED will turn off automatically when the paring is successfully done. Note: Once the BlueStar mouse is installed, you can either disconnect the a wired mouse or leave it connected. (If you leave two mice connected, they will both work. ) Disconnecting BlueStar mouse from your computer If you would like to disconnect your BlueStar mouse, just open the Bluetooth devices control panel and delete the pairing for the mouse. How to use the wheel Your mouse has a wheel that functions both as a wheel for windows scrolling and also as a customized button. It can be used as a standard mouse button, click (press down) the wheel. To use the middle button, directly press down the wheel. Mouse does not work upon installation or is not detected Try one or more of the following: · Make sure you have installed the batteries correctly and turn the switch on. Replace a fresh set of batteries if it still doesn't work. The screen cursor does not move properly If your screen cursor lags behind the movement, then your Bluetooth connection may not be able to transmit all of the data from the mouse with the necessary speed. This may be caused by interference from other radio sources, obstructions in the radio wave path, excessive distance from the Notebook or PC, or a combination of the above. Low Battery: Replace batteries you feel the battery being low. Try the following actions to improve your Bluetooth connection and optimize your BlueStar mouse performance: · Remove any metallic objects from the line of sight between your Notebook or PC and BlueStar mouse. ⷠIf you are using a Notebook or PC with a built-in Bluetooth antenna, try re-orienting the Notebook or PC until you get a better data rate. ⷠIf you are using an external Bluetooth device, use a USB extension cable and place the Bluetooth adapter onto your desktop or somewhere in sight of your BlueStar mouse. ⷠMove the mouse closer to your Bluetooth device. ⷠDisconnect any Bluetooth audio devices, such as headsets, that may be connected to your Notebook or PC. ⷠSwitch off any other devices operating in the 2. 4 GHz radio spectrum , such as Wi-Fi network , mobile telephones , etc. , or move their antennas further away from your Notebook or PC. Caution: It may sometimes interfere the sensor of the mouse, if your tabletop surface is in red color, transparent as glass or highly Try to use a mouse pad or use your mouse on a different tabletop surface. [. . . ] 4 GHz radio spectrum , such as Wi-Fi network , mobile telephones , etc. , or move their antennas further away from your Notebook or PC. Caution: It may sometimes interfere the sensor of the mouse, if your tabletop surface is in red color, transparent as glass or highly Try to use a mouse pad or use your mouse on a different tabletop surface. Other trademarks and trade names are those of their respective owners. [. . . ]