User manual DIGITAL BLUE DISNEY PIX MICRO DIGITAL CAMERA

[. . . ] Plug the headphones (included) into the Headphone jack on the bottom of the unit. To turn the unit on, slide the POWER switch to the ON (Down) position, then press the Play/Pause/Stop/ Power On button; the indicator will light orange and then green. Within a few seconds, playback will start automatically. To control the volume, simply press the VOLUME Down or Up button. [. . . ] 1924 TR IES S S O OCIATI 6 N A LOCATION OF CONTROLS 1. Play/Pause/Stop/ Power On Button Plug Cover) 3. Flash Plug (Inside Flash 1 2 3 4 5 6 7 8 7 11 12 13 14 13. Function Indicator This player has a built-in Lithium Polymer rechargeable battery. When the battery is low, the Function indicator will blink red slowly. In this case, recharge the battery as follows. Remove the Flash Plug cover and connect your player to the USB port on your computer using the Flash Plug as shown. The Function indicator will blink red and green when charging and will light constant red when fully charged. CHARGING THE BATTERY NOTE: · It takes approx. four hours to charge the battery from empty to full. When fully charged, the unit can playback for approx. 8 hours. 8 1 ATTACHING THE NECK STRAP 2 Press the Tabs to release the Strap connector from the Neck strap. Insert the rope through the hole in the main unit. 3 Insert the Strap connector through the rope's loop until snug. 4 Connect the Neck strap back to the Strap connector. IMPORTANT SAFETY FEATURE!Installation will begin. WINDOWS MEDIA PLAYER 10 INSTALLATION 3. Read the License Agreement, then click I ACCEPT. 13 WINDOWS MEDIA PLAYER 10 INSTALLATION (CONT. ) 4. At the Welcome screen, click NEXT. 6. Select the desired privacy options. 14 WINDOWS MEDIA PLAYER 10 INSTALLATION (CONT. ) 7. Click on Privacy Statement to view the Statement, if desired. Read the instructions and tick the check boxes as desired. Then click on More Options and tick the check boxes as desired. 9. Click "Finish" to finish the installation of the Windows Media Player 10. 15 For Windows XP, you can also utilize the previously installed Windows Media Player 10 software to convert music on an audio CD into MP3 or WMA format as follows: 1. Open the Windows Media Player 10 Browser, then click on the "Rip" icon on the top tool bar. Insert a Music CD into the CD-Rom drive of you computer. NOTE: For Windows 98SE, Windows ME and Windows 2000, please use the Windows Media Player 9 to convert music on an audio CD into MP3 or WMA format. [. . . ] 21 NOTE: There will be no resume function if the SD/MMC memory card is inserted/ removed or the music files is added or deleted from the player. There will be no resume function if the SD/MMC memory card is changed. When the unit is turned on, it will resume to the beginning of the last track which was playing before the power was turned off. TO LISTEN TO MP3s/WMAs 1 OPERATION­MUSIC PLAYBACK MODE 2 1 2 2 1 To turn the unit on, slide the POWER switch 1 to the ON (Down) position, then press the Play/Pause/Stop/Power On button 2; the indicator will light orange and then will light green. Within a few seconds, playback will start automatically. To control the volume, simply press the Volume Down 1 or Up 2 button. 3 Press and release the Play/Pause/Stop/ Power On/Off button to pause the music; the indicator will flash green. Press again to resume playback; the indicator will light green. [. . . ]