User manual DIGITECH CF7

[. . . ] Owner's Manual DECLARATION OF CONFORMITY Manufacturer's Name: Manufacturer's Address: declares that the product: Product name: Product option: CF 7 all (requires Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent. ) DigiTech® 8760 S. Sandy Parkway Sandy, Utah 84070, U. S. A. Warning For your protection, please read the following: Important Safety Instructions Read these instructions. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] Turn this knob clockwise to increase the depth for a thick chorus sound, or counter-clockwise to decrease the depth for a shallow, light chorus sound. CNTRL 3 (Voice) ­ Controls the number of chorus voices used. At the knob's minimum position, only a single chorus voice is present. At the maximum position, 16 voices are heard interacting with one another (when using stereo mode). 7 Model 2. Voodoo LabTM Analog Chorus The Voodoo LabTM Analog Chorus pedal has a distinctively organic tone that faithfully clones the 1976 Boss® CE-1. LEVEL ­ Controls the effect output level. Turn clockwise for more effect, or counter-clockwise for less effect. CNTRL 1 (EQ) ­ Adjusts the tone of the effect. Turn clockwise for brighter tone, or counter-clockwise for warmer tone. SPEED ­ Controls the rate that the chorus modulates. Turn counter-clockwise to decrease the rate. CNTRL 2 (Pre Delay) ­ Determines the amount of offset between the two signals that create the chorus effect. Turn clockwise for a looser chorus effect, or counter-clockwise for a tighter, more flanger-like effect. DEPTH (Intensity) ­ Controls the intensity of the chorus effect. Turn the knob counter-clockwise for a subtle effect. Turn the knob clockwise for a richer, deeper, processed sound. CNTRL 3 (Stereo Width) ­ Controls the perceived width of the stereo effect. Turn clockwise for a wider sound, or counter-clockwise for a narrower sound. This control only affects the sound when both outputs are used. 8 Model 3. TC Electronic® Stereo Chorus Flanger The classic TC Electronic® Stereo Chorus Flanger is the choice of many pros and still remains known as a state-of-the-art unit with incredible dynamic range. LEVEL (Intensity) ­ Controls the effect output level. Turn clockwise for more effect, or counter-clockwise for less effect. CNTRL 1 (EQ) ­ Adjusts the tone of the effect. [. . . ] Mono/Stereo Mixer - A mono signal (OUT 1 only) sent to a single mixer channel, or a stereo signal (OUT 1 and OUT 2) sent to two channels of a mixer. When the Chorus FactoryTM is shipped from the factory, the default mode is Mono/Stereo Amp. (MONO) 16 Cabinet Modeling (CITTM) The CF-7 has built-in CITTM cabinet modeling that can be enabled. This is a useful tool when running a distortion pedal into the CF-7 and then running direct into a mixer or recorder. This creates a guitar-through-anamplifier sound without having to use a guitar amp. [. . . ]