User manual DIGITECH DF7

[. . . ] Sandy, Utah, 84070 USA Ph: (801) 566-8800 12. Refer to labels on the unit, including bottom cover, or Fax: (801) 568-7583 other markings and pertinent information. all (requires Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent. ) DF-7TM Distortion FactoryTM Distortion pedals are as important to the world of guitar playing as guitar playing is to modern music, and the DigiTech DF-7 Distortion Factory is the most advanced distortion pedal ever created. We've modeled seven of the most popular distortion stompboxes of all time and packed them into one pedal equipped with our new, powerful Flexible Output ModeTM with selectable Stereo Spectrum Technology. Congratulations and special thanks from DigiTech® for choosing the DF-7TM Distortion FactoryTM Pedal. *DigiTech, DOD, Metal Master, Flexible Output Mode and CIT are trademarks of Harman International Industries, Incorporated. Other product names used in this document are trademarks of their respective companies and are not associated or affiliated with DigiTech. They are trademarks of other manufacturers and were used merely to identify products whose sounds were reviewed in the creation of this product. The DF-7 is designed to give you the tonal nuances, drive, and vibe reminiscent of the Ibanez® TS-9*, DOD® Overdrive/Preamp 250, Boss® DS-1*, Pro Co RatTM*, Boss® MT-2 Metal Zone®*, DigiTech® Metal MasterTM, and Electro-Harmonix® Big Muff ®*. The DF-7 also features Flexible Output ModeTM with a choice of six stereo spectrums and the acclaimed CITTM cabinet modeling technology. This gives you the flexibility to run either directly into a mixer or recording device utilizing the DF-7's cabinet models or amps in either stereo with 6 spectrum choices or mono. The DigiTech DF-7 Distortion FactoryTM includes the following items: ® TM Included Items Specifications · · · · · · · · · · · This Owner's Manual · Battery Notice · DigiTech DF-7 Distortion Factory Pedal Please make sure that all of these items have been included before you get started. · DigiTech Brochure · DigiTech Warranty Card Controls - LEVEL, LOW, MID FREQ, MID, GAIN, HIGH, DISTORTION MODEL, On/Off Pedal Jacks - INPUT, OUT 1 (AMP), OUT 2 (MIXER) Input Impedance - 1 MOhms Output Impedance - 100 Ohms Power Supply - (Optional) DigiTech PS200R or 9V Alkaline Dry Battery Power Consumption - 4. 8 Watts (w/optional PS200R power supply) Battery Life - Approximately 4 hours (with continuous usage) Dimensions - 4 15/16"(L) x 3 1/8"(W) x 2 1/8"(H) Weight - 2 lbs. (Optional) Power Supply PS200R - 100 (100V ~ 50/60Hz) PS200R - 120 (120V ~ 60Hz) PS200R - 230 (230V ~ 50Hz) PS200R - 240 (240V ~ 60Hz) Battery Replacement Directions 1. [. . . ] (See the These two pins are spring-loaded Flexible Output Mode and hinges that hold the pedal in place. Stereo Spectrum Set-up Push these pins in to release the sections. ) If the LED becomes dim pedal from the pedal chassis or does not light when using exposing the battery compartment. battery power (with the cables (See the Battery Replacement connected), the battery needs to Diagram. ) be replaced. 14. OUT 2 (MIXER) This output has been specifically designed for use with a full range audio system. It is designed to be plugged directly into a mixer or recording device for optimal performance. Each MODEL features a specific cabinet model when using this output. (See Flexible Output Mode and Stereo Spectrum Set-up sections. ) Distortion Model Descriptions DISTORTION MODEL 1 Based on the Ibanez® TS-9 Tube Screamer* For this model, the DF-7's GAIN, HIGH, and LEVEL knobs function like the TS-9*'s Overdrive, Tone, and Level controls, respectively. The DF-7 also features separate LOW, MID, and MID FREQ controls giving you added EQ flexibility so you can customize the model to suit you taste. Set the DF-7's LOW, MID, MID FREQ, HIGH, and GAIN knobs to the 12 O'Clock position to accurately reproduce this pedal model. overdrive sound. It is ideal for boosting your signal without adding a lot of distortion. This model recreates the vibe of the Ibanez TS-9 Tube Screamer*, famous for delivering a warm, natural tube When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a Fender® `65 Deluxe Reverb®* 1x12 cabinet. DISTORTION MODEL 2 Based on the DOD® Overdrive/Preamp 250 DISTORTION MODEL 3 Based on the Boss® For this model, the DF-7's GAIN and DS-1 Distortion* LEVEL knobs function like the DOD 250's Gain and Level controls, This model was inspired by the Boss respectively. The DF-7 also features DS-1 Distortion* pedal. It is great for separate LOW, MID, MID FREQ, adding distortion tone to your guitar This model reproduces the classic tone of the DOD® Overdrive/Preamp 250. It delivers a punchy overdrive effect typical of the legendary guitar sounds of the mid-seventies. MODEL 2 is great for pushing the front end of your tube amps and is a key element of many players' tone. and HIGH controls giving you added EQ flexibility so you can customize the model to your desired taste. Set the DF-7's LOW, MID, MID FREQ, HIGH, and GAIN knobs to the 12 O'Clock position to accurately reproduce this pedal model. When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a Marshall®* 4x12 cabinet. For this model, the DF-7's GAIN, HIGH, and LEVEL knobs function like the DS-1's* Distortion, Tone, and Level controls, respectively. The DF-7 also features separate LOW, MID, and MID FREQ controls giving you added EQ flexibility so you can customize the model to suit your taste. Set the DF-7's LOW, MID, MID FREQ, HIGH, and GAIN knobs to the 12 O'Clock position to accurately reproduce this pedal model. signal while maintaining the dynamic nuances of your playing. DISTORTION MODEL 4 Based on the Pro Co RatTM* This model was fashioned to recreate the sonic boom of the Pro Co Rat* pedal. It offers you the perfect blend of distortion with sustain and cutting power. Use this model to get a harmonically rich tone with an aggressive edge. When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a Johnson®* 4x12 cabinet. For this model, the DF-7's GAIN, HIGH, and LEVEL knobs function like the Rat's* Distortion, Filter, and Volume controls, respectively. The DF7 also features separate LOW, MID, and MID FREQ controls giving you added EQ flexibility so you can customize the model to suit your taste. Set the DF-7's LOW, MID, MID When this model is selected, the CIT cabinet model used in Flexible Output Modes 1 and 2 is based on a Fender®* Bassman®* 2x12 cabinet. DISTORTION MODEL 5 Based on the Boss® MT-2 Metal Zone®* FREQ, HIGH, and GAIN knobs to the 12 O'Clock position to accurately reproduce this pedal model. LOW, MID, MID FREQ, HIGH, and GAIN knobs function like the MT2's* Level, Low, Mid Freq, Middle, High and Distortion controls, respectively. Set the DF-7's LOW, MID, MID FREQ, HIGH, and GAIN knobs to the 12 O'Clock position to accurately reproduce this pedal model. This model recreates the over-the-top distortion of the Boss MT-2 Metal Zone* pedal. It will add sustain and body to your sound while juicing up your mids and lows like a full stack. [. . . ] Proof-of-purchase is considered to be the burden of the consumer. 3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION, where all parts and labor will be covered up to a period of one year (this warranty is extended to a period of six years when the product has been properly registered by mail or through our website). A Return Authorization number may be obtained from DigiTech by telephone. The company shall not be liable for any consequential damage as a result of the product's use in any circuit or assembly. 5. [. . . ]