User manual DIGITECH GSP1101 BROCHURE

[. . . ] GSP1101 Guitar Preamp/ Processor Owner's Manual IMPORTANT SAFETY INSTRUCTIONS WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING: KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS The symbols shown above are internationally accepted symbols that warn of potential hazards with electrical products. The lightning flash with arrowpoint in an equilateral triangle means that there are dangerous voltages present within the unit. The exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to the owner's manual. These symbols warn that there are no user serviceable parts inside the unit. [. . . ] The Level parameter ranges from 1. 0 to 10. Treble Adjusts the high frequencies of the selected Amp model (not available for Direct). The Level parameter ranges from 1. 0 to 10. Amp. Level Adjusts the Level (volume) of the selected Amp model. Ranges from 0 to 99. GSP0 Owner's Manual The Edit Effects/Preset Screen PARAMETRIC EQ The GSP1101's EQ helps further shape your tone with Low, Mid, and High controls. Parameters include: EQ Turns the EQ on or off. Low. Level Adjusts the low end level (bass) selected with the Low Freq parameter (described below). Low. Freq Selects the frequency that the Low parameter adjusts. Low. Width Adjusts how much of the band spectrum above and below the Low Freq parameter is affected by the Low parameter. Mid. Level Adjusts the mid-range level selected with the Mid Freq parameter (described below). Mid. Freq Selects the frequency that the Mid parameter adjusts. Mid. Width Adjusts how much of the band spectrum above and below the Mid Freq parameter is affected by the Mid parameter. High. Level Adjusts the high-range level (treble) selected with the High Freq parameter (described below). High. Freq Selects the frequency that the High parameter adjusts. High. Width Adjusts how much of the band spectrum above and below the High Freq parameter is affected by the High parameter. GSP0 Owner's Manual The Edit Effects/Preset Screen FX LOOP / PREAMP LOOP The GSP1101 features a configurable Loop that can be utilized as either an Effects Loop or as a Preamp Loop. As an Effects Loop, the GSP1101 offers a way to connect an external effects device that can be turned on and off within the signal chain. When configured as a Preamp Loop, you can switch between using an external preamp or the internal GSP1101 amp/preamp modeling. See page 45 for more information about using the loop. GATE A Noise Gate is designed to eliminate noise while you are not playing, or provide an auto volume swell effect. Model Selects between the DigiTech® noise gate or the volume swell effect. Parameters include: GATE Selects the Noise Gate SWELL Selects the Auto Swell effect. Sets the signal strength (Threshold) required to open or close the Noise Gate. [. . . ] Turn the Edit/Select knob until the MIDI menu is selected and press the knob. Turn the Edit/Select knob until Merge Tempo is selected. Press the Edit/Select knob to turn the option on or off. Press the Back button to return to the previous menu. Preset Load From the factory the GSP1101 is set to automatically load presets when they are selected using the Edit/Select knob. [. . . ]