User manual DIGITECH JAMMAN DELAY LOOPER PHRASE SAMPLER

[. . . ] Owner's Manual Professional Audio Equipment IMPORTANT SAFETY INFORMATION WarnInG for your ProtectIon reaD tHe foLLoWInG: KEEP THESE INSTRUCTIONS HEED ALL WARNINGS the symbols shown above are internationally accepted symbols that warn of potential hazards with electrical products. the lightning flash with arrowpoint in an equilateral triangle means that there are dangerous voltages present within the unit. the exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to the owner's manual. these symbols warn that there are no user serviceable parts inside the unit. [. . . ] When you are ready to set the loop point for your phrase, press the Rec/PLaY/oVeRDUb footswitch to set the loop point and have the phrase play back in a repeating loop. The Rec/PLaY/oVeRDUb footswitch and PLaY status LEDs will light solid green. Press the teMPo/stoP footswitch to stop the loop playback. 3. 4. 5. 6. Once you are finished recording, the stoRe button will be lit indicating the phrase must be stored to memory to be recalled later. 24 Recording a Loop - Inst/Mic Input 1 3 4 5 2 6 25 Auto Record Mode The JamMan® Stereo's Auto Record feature lets the JamMan automatically begin recording when you begin playing or when audio is detected at the JamMan Stereo's inputs. When enabled, Auto Record works globally on all empty loop memories; you cannot use Auto Record with an existing loop. When the Rec/PLaY/oVeRDUb footswitch is pressed, the JamMan Stereo is armed for recording but won't start recording until you start playing (the RecoRD status and Rec/PLaY/oVeRDUb footswitch LEDs flash red to show that the JamMan is armed). The JamMan monitors the input level and starts the recording when it detects an audio signal. If you've tapped in a tempo while Auto Record is enabled, the rhythm guide track will begin playing. Pressing the Rec/PLaY/oVeRDUb footswitch will arm the JamMan Stereo for recording. As soon as signal is detected, recording will begin immediately. Changing to an empty loop memory while aUto Rec is enabled will preserve the aUto Rec state (the aUto Rec button will turn off when a memory that has a loop already stored in it is selected). To turn off Auto Record, press the aUto Rec button until it turns off. 26 Auto Record Mode Auto Record button 27 Recording a Loop Using Auto Record The JamMan® Stereo has an Auto Record feature that automatically starts recording when signal is detected at any of the JamMan Stereo's inputs. NOTE: The maximum loop time the JamMan Stereo can record or play is 10 minutes. You can't auto-record on an existing loop; Auto Record is only available when an empty loop memory is selected. Here is how to use Auto Record when recording a loop. Select an empty memory location using the LooP seLect knob or LooP UP/LooP DoWN footswitches (the LooP and sINgLe LEDs will be off). If the caRD MeM LED is lit, you have selected an empty location on the optional memory card. Press the Rec/PLaY/oVeRDUb footswitch to arm record. The Rec/PLaY/oVeRDUb footswitch and RecoRD status LEDs will be quickly flashing red indicating the JamMan Stereo is armed for recording. The Rec/PLaY/oVeRDUb footswitch and RecoRD status LEDs will light solid red to indicate recording is now taking place. When you are finished recording, press the Rec/PLaY/oVeRDUb footswitch once to set the loop point and have the phrase play back in a repeating loop. The Rec/PLaY/oVeRDUb footswitch and PLaY status LEDs will light solid green. [. . . ] To erase all loop data, press and hold the DeLete button for two more seconds. The DIsPLaY will show Bu indicating the card is being erased. 5. 6. NOTE: If when you try to delete a loop from SD card the display flashes CP, the SD copy protection switch is in the "Locked" position. Unlocked Locked SD Card 56 Erase All Loops - Memory Card 1 2 3 4 5 6 57 Factory Restore This procedure will return the JamMan® Stereo to its original factory settings. All internal loop memories will be reformatted and the original 10 loops that shipped with the JamMan Stereo will be restored. [. . . ]