User manual DIRT DEVIL TURBINE POWERHEAD

[. . . ] The Turbine Powerhead moves easily and does not require downward pressure for thorough cleaning. Please read and save these Operating Instructions. SAFETY PRECAUTIONS As with any tool with moving parts, caution must be exercised while using this Turbine Powerhead. Keep hair, hands and feet away from rotating brush while the Turbine Powerhead is running. [. . . ] Threads, string, carpet fiber, fuzz and similar items may become wound around the beater brush. These should be removed by unwinding them by hand or carefully cutting with scissors. Keeping the beater brush clean will maintain efficiency. Page 3 Use & Care of Your Turbine Powerhead (D) REMOVING CLOGS Follow these steps if the turbine becomes obstructed: 1. Turn off vacuum system and disconnect the Powerhead. Remove the clear belt cover by turning the Powerhead over and rotating the two latches until they align with the openings in the belt cover. Remove debris from the intake or turbine. Rotate brush to ensure the system is clear. Ensure the orange seal on the belt cover and mating surfaces are clean before reinstalling the belt cover. To reinstall the belt cover, simply insert the front of the belt cover under the baseplate edge and lower into its original position. Secure the belt cover in place by turning the two latches to the locked position. Turn latches to remove Belt Cover Remove Belt Cover Like This Remove clog here. Baseplate Edge Page 4 Use & Care of Your Turbine Powerhead (E) REPLACING THE DRIVE BELT It is recommended that the drive belt be replaced by a Qualified Service Technician. Turn off vacuum system and disconnect powerhead. Remove belt cover as described on page 4. Remove the 3 screws securing the baseplate. IMPORTANT: Please note correct brush and belt orientation. They must be reinstalled correctly for proper function. Lift the brush, belt and support assembly out of the housing. Place the new belt over one end, onto the brush roller, between the two center flanges. Slide the brush/belt assembly back into the housing recesses so the supports seat properly into the housing. [. . . ] warrants that the turbine powerhead when used for household purposes, pursuant to Seller's instructions, will be free from defects in materials and workmanship for a period of three(3) years from the date of the initial consumer purchase. warrants that the turbine powerhead, when used in a commercial application pursuant to Seller's instructions, will be free from defects in materials and workmanship for a period of ninety (90) days from the date of the initial consumer purchase. This warranty is limited to the replacement of defective parts and any costs of shipping shall be incurred by the purchaser. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, AND H-P PRODUCTS, INC. [. . . ]