User manual DIRTDEVIL MBV2000D

[. . . ] use only manufacturer's recommended attachments. Do not use charger with dama ed cord or plug. If vacuum or charger is not working as it s ould, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center. Never carry the charger or base by the cord or yank to disconnect from an outlet; instead grasp the charger and pull to disconnect. [. . . ] Warrants this vacuum cleaner to be free of defects in material or workmanship commencing upon the date of the original ~urchase. Gefer to your vacuum cleaner carton for the length of warranty and save your ori~inal sales rece~pt validate start of warranto ty period. If the vacuum cleaner should become defective within the warran period, we will repair or re lace any defective parts free of char e. The complete machine must be delivered r aid to a y ROYAL Authorized ~ a l e s Warran Service Station. lease include com lete description ofthe problem. Day g of purchase co of or1 in& recel t and your name, address and telep one number. If you are not near a harratanty Stat~on, call the factory for assistance U& 1-80~-321-11341CA~ADA: 1-800-661-6200. The warranty does not include unusual wear, damage resulting from accident or unreasonable use of the vacuum cleaner. This warranty does not cover belts, brushes, bags, bulbs or fan damage. This warranty does not cover unauthorized repairs. This warranty gives you specific legal rights and you may also have other r ~ h t s . (Other nghts may vary from state to state In the USA). Mount on the wall in a vertical position near an outlet. The base may be mounted with the cord at the top or bottom according to preference. NOTE: Do not mount the base near a heat source or where it could be exposed to direct sunlight. With base against the wall, mark the two hole locations. Arrange any excess length of the electrical cord behind the base. (Diagram 2) You may route the cord through any of the four slots on the side walls of the base. Passer le fit a travers I'ouverture et glisser le fit dans la pince pour le fixer correctement. (flat head and Phillips screwdrivers are required) To access bristle strips and foam pad, you must remove the retaining plate and backing plate. [. . . ] Vacuum can remain on charge for an indefinite period without any danger of overcharging the batteries. Making sure black piece is on threaded end of handle, insert handle into unit. To remove the accumulated dirt, turn the vacuum "ON" with the tip of your toe. Be sure to turn vacuum "OFF" once you have finished vacuuming up the dirt. [. . . ]