User manual DIRTDEVIL MHDU600

[. . . ] Let us help you put your vacuum together or answer any questions, call: 1-877-REGINA6 (USA & Canada) Cleaner assembly may include small parts, Small parts can present a choking hazard. For quick reference, please record your vacuum information below. Warrants this vacuum cleaner to be free of defects in material or workmanship commencing upon the date of the original purchase. Refer to your vacuum cleaner carton for the length of warranty and save your original sales receipt to validate start of warranty period . [. . . ] Electrical Shock Hazard Do not plug into the electrical supply until the assembly is complete. Insert the hose collar into the opening at the rear of the body until it snaps. Insert another hose collar into the lower part of the body. Your upright vacuum cleaner is designed with an automatic adjusting nozzle. Before you plug in your vacuum cleaner, make sure that the voltage indicated on the rating label of the vacuum cleaner is the same as your local supply. If the vacuum cleaner stops automatically, always turn off the switch and unplug the unit before checking. The handle may be adjusted to any position required. The handle is released to move up and down freely. Adjust the body to any position required. When cleaning under furniture, parallel position may be used. To get to the parallel position, press handle release pedal again. To move your vacuum cleaner from room to room, put the handle in upright position, tilt the vacuum cleaner back on its rear wheels, and push forward. The cleaner can also be moved by lifting it, from the carrying handle as shown. To release the power cord, rotate the quick release cord hook downward and the entire power cord will drop off the hook for immediate use. do not unplug the cord by pulling on the cord. Grasp the plug head and pull to unplug the vacuum cleaner. Return the quick release cord hook to the upright position before attempting to rewind the cord. There is a recessed area on the body of the quick release cord hook, designed to secure the power cord during vacuuming. Insert the power cord into this groove to help keep the power cord from hanging and being damaged by brushroll or other moving parts. Remove the lower end of hose from the vacuum cleaner by pulling out the hose collar. Turn the lower extension wand to the UNLOCK position. When the front brush is removed, the remaining part can be used as an upholstery nozzle. [. . . ] When excessive dirt accumulates, your cleaner may not operate effectively. Pull the dust cover grip forward and remove the dust cover from the cleaner. Attach a new filter bag onto the filter bag holder holding the filter bag collar and pushing back as shown in the figure. Insert the tabs on the bottom of dust cover into the grooves on the dust compartment. [. . . ]