User manual DIRTDEVIL MMV3120S 7-99

[. . . ] OWNER'S MANUAL * 3 Operating and Servicing Instructions Please read these instructions carefully before using your Mop V a ~ 2 ~ ~ . Let us help you put your Mop Vac 2TM together or answer any questions, call: 1-800-321-1 134 (USA) 1-800-661-6200 (Canada) For quick reference, please record your vacuum information below. code located on the lower backside of cleaner) Espaiiol pagina E l - 0 1999 All rights reserved #I -312622-033 7/99 THIS CLEANER IS INTENDED FOR HOUSEHOLD USE ONLY IMPORTANT SAFETY INSTRUCTIONS When you u s e an appliance, basic precautions should be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. ALWAYS FOLLOW THESE SAFETY INSTRUCTIONS. [. . . ] If you are not near a Warranty Statlon, call the factory for assstance at USA: 1-800-321-1134 / C ~ A D A 1-800-161-6200. Use only genulne Royal replacement parts. : I The warranty does not include unusual wear, damage resulting from accident or unreasonable use of the vacuum cleaner. This warranty does not cover belts, brushes, bags, bulbs or fan damage. This warranty does not cover unauthorized repairs. This warranty gives you specific legal rights and you may also have other rights. (Other rights may vary from state to state In the USA). Fia. 2 ALCl (See Page 6) FEATURES Fia. Upper Handle with non-slip gripTM Sponae release lever . Wringer Lever (serves as suction onloff switch) Lower Handle Wringer Rod Sponge Head Wringer Rollers Cleaning Solution Plunger Fia. 15. Cleaning Solution Bottle Latch Cleaning Solution Bottle Vents Recovery Tank Latch Recovery Tank Wheels Squeegee HOW TO ASSEMBLE: I TOOL REQUIRED: PHILLIPS SCREWDRIVER 1. UPPER AND LOWER HANDLES: Slip upper handle of Mop Vac onto lower handle, making sure groove in lower handle aligns with tab in upper handle. Tighten handle retainer nut clockwise (Diagram 1). ~old'cleaningsolution bottk with plunger upright and slide into place on back of Mop Vac (Diagram 2). Close cleaning solution bottle latch to hold bottle in place (Diagram 3). 2 HOT Tap Water Note: Always sweep floor first. For best results, use Mop Vac on smooth floors. Mop Vac is designed for light-duty floor washing only, not for large spill pick-up. WARNING: Use Mop Vac on floors only, not walls or overhead surfaces. FILL CLEANING SOLUTION BOlTLE ( 1 6 0 ~ ) : Open cleaning soluiion bottle latch and remove bottle (Diagram 1). Place on flat surface and remove black fill cap. Fill bottle with hot tap water to bottom of cap opening. Pour one capful (112 02. ) of Dirt DevilaDlow-sudsing cleaning solution into bottle (Diagram 2). Replace cap and slide bottle into place on back of Mop Vac (Diagram 3). [. . . ] Close recovery tank latch to keep in place. Drain and rinse out cleaning solution bottle (Diagram 4). Sponge may be removed for cleaning or replacement (see Sponge Head Removal and Replacement section of manual). Caution: Do not tilt ~ o Vac to rinse sponge head until recovery tank has been emptied. [. . . ]