User manual DIRTDEVIL MRY5300

[. . . ] Let us help you put your vacuum together or answer any questions, call: 1-800-321-1134 (USA & Canada) Cleaner assembly may include small parts, Small parts can present a choking hazard. For quick reference, please record your vacuum information below. Warrants this vacuum cleaner to be free of defects in material or workmanship commencing upon the date of the original purchase. Refer to your vacuum cleaner carton for the length of warranty and save your original sales receipt to validate start of warranty period. [. . . ] Make sure the quick release cord hook is in the upright position. Wrap the power cord around the quick release cord hook and lower cord retainer, and then lock the power cord plug onto the power cord. Insert the tab of accessory holder into the groove at the rear of the body, and snap the hook into the upper groove, and screw it on the columns which are on the back of the body base. Electrical Shock Hazard Do not plug into the electrical supply until the assembly is complete. Insert the hose collar into the opening at the rear of the body until it snaps. Insert another hose collar into the lower part of the body. Your upright vacuum cleaner is designed with an automatic adjusting nozzle. ¥ DO NOT use outlets above counters. Before you plug in your vacuum cleaner, make sure that the voltage indicated on the rating label of the vacuum cleaner is the same as your local supply. If the vacuum cleaner stops automatically, always turn off the switch and unplug the unit before checking. The handle may be adjusted to any position required. The handle is released to move up and down freely. Adjust the body to any position required. When cleaning under furniture, parallel position may be used. To get to the parallel position, press handle release pedal again. ¥ DO NOT use outlets above counters. To move your vacuum cleaner from room to room, put the handle in upright position, tilt the vacuum cleaner back on its rear wheels, and push forward. The cleaner can also be moved by lifting it, from the carrying handle as shown. To release the power cord, rotate the quick release cord hook downward and the entire power cord will drop off the hook for immediate use. do not unplug the cord by pulling on the cord. Grasp the plug head and pull to unplug the vacuum cleaner. Return the quick release cord hook to the upright position before attempting to rewind the cord. [. . . ] Failure to do so could result in personal injury from the brushroll releasing quickly and snapping away. This exhaust filter should be replaced after every third bag change. Pull outward on the dust cover grip to remove dust cover. Failure to do so could result in electrical shock or personal injury from the vacuum cleaner suddenly starting. [. . . ]