User manual DIRTDEVIL ND40005PC 7-10

[. . . ] Your pressure washer has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. Please read these instructions carefully before using your electric pressure washer. Let us help you put your pressure washer together or answer any questions, call: WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. [. . . ] The following signal words and meanings are intended to explain the levels of risk associated with this product. DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. double insulated products do not need to be grounded. WARNING: The double insulated system is intended to protect the user from shock resulting (Without Safety Alert Symbol) Indicates a situation that may result in property damage. Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. From a break in the product's internal insulation. observe all normal safety precautions to avoid electrical shock. NOTE: Servicing of a product with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service, we suggest you return the product to your nearest authorized service center for repair. Always use original factory replacement parts when servicing. eLECTRICAL CONNECTION This product has a precision-built electric motor. It should be connected to a power supply that is 120 volts, AC only (normal household current), 60 Hz. Do not operate this product on direct current (DC). a substantial voltage drop will cause a loss of power and the motor will overheat. If the product does not operate when plugged into an outlet, double-check the power supply. EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the product will draw. an undersized cord will cause a drop in line voltage , resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter's Laboratories (UL) should be used. [. . . ] WARNING: Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to stop, disconnect unit from power supply, and pull trigger to release water pressure. Failure to follow these instructions can result in serious personal injury or property damage. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. [. . . ]