User manual DIRTDEVIL PD20025PC 4-10

[. . . ] Do not pour water or use alcohol, benzene or paint thinner on the unit. Extreme caution should be exercised when using this appliance to clean stairs. Do not completely remove safety cap when tank is hot. Do not turn on until tank if filled with water. [. . . ] Then place the machine in a cool place to cool it down for about five minutes. Finally, completely remove the safety cap. Empty water from the water tank before storing. Keep water funnel and measuring cup for future use. Reduced steam or no steam Product worked intermittently and then stopped The indicator light is on Take to service center or call 1-800-321-1134 2. Take to service center or call 1-800-321-1134 When using an electrical appliance, basic precautions should always be followed, including the following: · In the event that further assistance is required, see your Yellow Pages for an authorized Royal® Dealer. Costs of any transportation to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from an authorized Royal® Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when requesting information or ordering replacement parts. (The model number appears on the bottom of the cleaner. Use the product only for its intended use. Never direct liquid or steam towards people, animals or plants. Never direct liquid or steam towards equipment containing electrical components. Do not leave the product unattended when plugged in. Always unplug the power cord from the electrical outlet when not in use and before servicing. ⷠDo not allow to be used as a toy. Close attention is necessary when used by or near children, pets and plants. ⷠDo not use any extension cord with this product. ⷠDo not handle the plug, or the product with wet hands. Do not operate the product without footwear. ⷠDo not put any objects into openings. ⷠDo not place hands or feet under the product while it is in operation as the unit gets very hot and may create a burn hazard. [. . . ] To remove the Long Spray Nozzle rotate the opposite way, till the orientation mark of the Long Spray Nozzle is aligned with the orientation mark on the Hand Steam Unit. Then gently pull the Long Spray Nozzle away from the Hand Steam Unit. Installation of the Extension Spray Nozzle can be done in a similar manner. The Curved Spray Nozzle or Round Brush Spray Nozzle can be assembled directly to the Hand Steam Unit or can be assembled to the Long Spray Nozzle. [. . . ]