User manual DK DIGITAL DCR-B5000

[. . . ] for choosing one of our Car Stereo Systems. For your own safety and in order to learn all about the functions available, please read this manual and keep it for future reference. And if you once sell the unit please include the manual. www. dk-digital. com © 2006 Copyright, manufacturer: DK digital GmbH 2 Contents Important Safety Instructions, please read carefully . 4 5 5 5 6 6 6 7 8 9 10 11 11 11 11 11 13 13 13 13 14 14 14 15 15 15 16 17 18 19 20 20 21 Place of installation. Remove and re-attach the detachable panel . [. . . ] The channel search will then only stop for channels with high transmitting power. Select "DX" in areas with channels with low transmitting power. The channel search will then stop for channels with low transmitting power as well. Radio mode When switching it on the device runs in the radio mode. To switch to radio mode from other operation modes, push the MODE button so many times until a frequency or the name of a radio station is shown in the display. What is RDS? RDS (Radio Data System) is a system for transmission of additional information with the FM radio programme transmitted in many European countries. RDS radio tuner can filter this information from the transmit signal and use it for various functions. This device uses the following RDS functions: -- Display of the name of the radio station -- Display of programme type (PTY) and search for programme contents -- Display of time in the display. When you are tuned to a station that transmits RDS information, the name of the radio station is automatically displayed. Selecting the frequency band Press the BAND button several times to select the desired frequency band: FM1 / FM2 / FM3 = FM, MW 1 / MW 2 = AM (Medium wave). Searching for radio stations Manual tuning Press the TUNE/TRACK button 9 or :, repeatedly to search step by step for a frequency higher or lower than the one shown in the display. Search run to the next radio station When you hold down the TUNE/TRACK button 9 or : for one second, search run will start backward or forward until a strong enough signal is received. The search run will stop there and play the radio station. FM stations normally transmit in stereo. Provided the signal received is strong enough, the programme is played in stereo and the symbol in the display lights up. Area Scan Briefly press the SCN button to start a search run that is constantly scanning the current frequency range. The car radio will play every radio station it finds for a few seconds before 13 continuing the search run. When the car radio finds a programme you would like to listen to, press the SCN button again to stop the search run. Saving radio stations Saving radio stations manually If you want to call up your favourite radio stations by station buttons you will have to save them first. You can save 18 stations from FM band 12 stations from MW band and. Since the device only has 6 station buttons, the FM band is divided into FM1 / FM2 / FM3 (3 x 6 = 18). Each F range comprises the entire frequency range to select from but at the same time stands for different groups of saved stations: FM 1 = stations 1 - 6 FM 2 = stations 7 - 12 FM 3 = stations 13 - 18 To save your favourite radio stations e. g. from the FM band you have to proceed as follows: 1. Tune to the first station you want to save. Hold down the station button 1 for one second. Station number "1" appears in the display and the station is now saved. Repeat steps 1 to 3 to allocate radio stations to the buttons 2-6 5. [. . . ] Press (+) button in Bluetooth Remote Box longer than 6 seconds. Note: To deactivate Pairing, Press (+) again longer than 3 seconds. Turn on the Bluetooth connection of the mobile phone. The mobile will search for any Bluetooth devices within the range. [. . . ]