User manual DLINK DIR-100

[. . . ] Building Networks For People DIR-100 Ethernet Broadband Router User Manual CONTENTS About This User's Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Installation Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Installation Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] A typical User Name will be in the form user1234@isp. co. ru. The Password may be assigned to you by your ISP or you may have selected it when you set up the account with your ISP. Type the password again in Confirm Password. For Static PPPoE connections, enter IP settings provided by the ISP and, if necessary enter MAC address (see table below) 5. Leave the MTU value at the default setting (default = 1492) unless you have specific reasons to change this (see table below for more information). Select from: Always ON, Connection On Demand, or Manual. Most users will want to choose the default connection setting, Always ON. 24 DIR-100 Ethernet Broadband Router Settings for PPPoE conntections: PPPoE User Name Password Retype Password Service Name IP Address MAC Address Description The user name supplied to you by your ISP. The password supplied to you by your ISP. Retype the password entered in the Password feld. Enter the service name supplied to you by your ISP, if required. Enter the IP address given to you by your ISP. This field is only to be completed if the Static PPPoE button is selected. This field will instruct the user to enter the Media Access Control (MAC) address of the Ethernet Card of your computer, if instructed to do so by your ISP. To quickly accomplish this, click the Duplicate MAC address from the customer end button, which will automatically copy the MAC address of your Ethernet card and enter it into the space provided, which will replace the MAC address of the router. This entry is for the IP address of your primary domain name server, which should also be provided to you by your ISP. The router will first try the Primary DNS Address to resolve a website's URL IP address. If this IP address fails, the router will then try the Secondary DNS Address. This field is only to be completed if the Static PPPoE button is selected. The IP address of the secondary domain name server will be used to resolve a website's URL IP address if the Primary DNS Address fails. The information in this field should also be provided by your ISP and is only to be completed if the Static PPPoE button is selected. A value of 0 means that the PPP connection will remain connected. [. . . ] Skip to "Configure IP Information" 5. If TCP/IP does not display as an installed component, click Add. In the Select Network Protocol dialog box, select TCP/IP, and then click OK. You may be prompted to install files from your Windows NT installation CD or other media. [. . . ]