User manual DLS IC636 2010-10-28

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DLS IC636. We hope that this DLS IC636 user guide will be useful to you.

Lastmanuals help download the user guide DLS IC636.


Mode d'emploi DLS IC636
Download
Manual abstract: user guide DLS IC6362010-10-28

Detailed instructions for use are in the User's Guide.

[. . . ] This manual will show you how to do a correct installation. Please read the entire manual before beginning. Install the speakers yourself if you feel confident with our instructions and if you have the proper tools. [. . . ] Just make sure that the damping material don´t fall into the speaker, especially in roof mount installations. Check that the damping material meet the local fire and building regulations. Avoid placing roof mounted speakers closer to a wall or corner than 50 cm (20"). Make sure the cables don´t get jammed causing a short circuit as this can damage the output circuits of your amplifier. Make sure the amplifier is OFF when you connect the cables. If you connect more than one speaker in series or parallel, make sure the resulting impedance is in accordance with your amplifier specifications. Power 2x4 ohm 2x4 ohm 50 W 60 W Max power 100 W 120 W Sensitivity 90 dB 91 dB Magnet size 90 mm / 3, 54" 100 mm / 4" Installation depth 75 mm / 3"" 82 mm / 3, 23" Mounting hole cut out size 192 mm / 7, 56" 192 mm / 7, 56" Outer size Dimension 228 mm / 8, 98" 210 mm / 8, 30" IC236 IC636 Anslut + kabeln till den röda terminalen och - kabeln till den svarta. Use the template coming with the speaker to cut or saw a hole for the speaker frame. the speaker accepts a material thicknes of 10 - 33 mm (0 , 4-1 , 3"). Remove the grille from the plastic frame by pushing two of the wings from the backside. The screws that became visible when you removed the grille, has wings attached that will swing out behind the wall or roof panel when you turn the screws clockwise. Don´t tighten the screws too hard, there is a risk that you deform the plastic frame. When installed in a soft panel in the ceiling, use a piece of MDF or particle board to reinforce the installation. The frames are paintable if you like some other colour than white. You must cover the speaker, or remove it from the frame, before painting. Behind the front grille is a switch for tweeter level select. [. . . ] You can always send an e-mail to info@dls. Information can also be found on our WEB-site www. For this reason all or part of specifications & designs may be changed without prior notice. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DLS IC636

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DLS IC636 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag