User manual DOLMAR BC-250 PARTS LIST

[. . . ] Remove the batteries if the weather station is not to be used for a long time. Old batteries can begin to leak and damage the product. Remember to always insert the batteries according to the markings in the battery compartment. The wrong polarity (+/­) can damage the weather station. [. . . ] the "+" and "­" buttons will begin to flash. Use either "+" or "­" in order to change between displaying C (Celsius) and F (Fahrenheit). Touch the same section a third time in order to set the alarm to sound for high outdoor temperature. Change the values with the "+" and "­" buttons or turn off the alarm with the ON/OFF button. Touch the same section a fourth time in order to set the alarm to sound for a low outdoor temperature. Change the values with the "+" and "­" buttons or turn off the alarm with the ON/OFF button. Touch the same section again in order to set the alarm to sound for high humidity. Press the same section for a third time in order to display the highest measured humidity. Select the average wind speed or highest measured wind speed by pressing the "+" or "­" buttons. Touch the same section a third time in order to set the alarm to sound for high wind speeds. Change the values with the "+" and "­" buttons or turn off the alarm with the ON/OFF button. Press "+" and "­" in order to change the date format DD-MM or MM-DD (the display shows dM or Md depending on which format is chosen). Press the date display a third time causing the year display to flash. Change the year value by using "+" and "­" . Change the month by using "+" and "­". Then press ON/OFF to turn on/off the alarm. Memory: The memory symbol MEMORY on the bottom part of the screen shows how much memory has been used for weather data history. The weather history can be saved at desired intervals. These intervals can be changed via the software. The weather station can save up to 4080 readings complete of complete weather data, including the time and date. The weather data is saved in EEPROM and is therefore unaffected if the battery is taken out (during battery change). If the memory capacity is overrun the oldest information is automatically replaced by the new reading. [. . . ] exe file in order to start the program. All possible settings on the weather station are shown in the programme. If you have already chosen the settings in the weather station no other changes need to be made in the programme. Changes can however be made in the programme and then automatically be transferred over to the weather station (updates occur every 60 seconds). [. . . ]