User manual DOLMAR ES-35 PARTS LIST 3-00

[. . . ] They are equipped with numerous state-of-the-art safety devices, are light, handy and can be put into operation immediately wherever electric power is provided. In order to guarantee the optimal function and performance of your electric chain saw and to ensure your personal safety we would request you to perform the following: Read and understand this instruction- and safety manual carefully before putting the electric chain saw into operation for the first time. strictly observe the warnings and safety regulations!Failure to do so can result in serious injury to the operator and/or bystanders! [. . . ] In the case of damage caused by using waste oil or unappropriate saw chain oil the product guarantee will be null and void. Your salesman will inform you about the use of saw chain oil. Mineral oil products as well as oil degrease the skin. If your skin repeatedly comes in contact with these substances for a longer period of time, it will desiccate. in addition , allergic reactions are known. Eyes can be irritated by contact with oil. If oil gets into your eyes, immediately wash them with clear water. If your eyes are still irrritated, go to see a doctor. Only if the motor is switched off and the power supply plug is pulled out!Thoroughly clean the oil tank around the cap to prevent dirt from entering the tank. Unscrew the tank cap (1) and fill in chain oil until it is on a level with the bottom edge of the filler socket. When switching on the electric chain saw always hold it with both hands. Take the back handle with the right hand and the tubular handle with the left hand. Hold the handles tightly with your thumbs facing your fingers. The bar and chain must not be in contact with any object. First depress the locking button (5) and then the power switch (1). Keep the power switch depressed as long as the motor is to run. Never lock the power switch in the ON position. When the chain brake is actuated the power supply to the motor will be cut off. If the saw does not start when the ON/OFF switch (1) is actuated, it will be necessary to release the chain brake. Pull the hand guard (6) firmly in the direction of the arrow until you feel it catch. Important: These models are equipped with a starting current limiter. [. . . ] The user of the electric chain saw is not allowed to perform maintenance works which are not described in the instruction manual. All other works must be carried out by a DOLMAR service center. Page General work Electric chain saw Plastic case Saw chain Guide bar Sprocket Chain brake Run-out brake Each time before putting the saw into operation Saw chain Guide bar Chain lubrication Chain brake Run-out brake Power switch Power supply cable Oil tank cap After each shutdown Storage Guide bar Chain carrier Chain oil tank Saw chain/guide bar Electric chain saw Regularly clean the outside. Turn over after a certain period of time so that the bearing surfaces are uniformly worn. [. . . ]