User manual DOLMAR ES2141KTLC

[. . . ] Chain speed Bar length Standard guide bar Cutting length Guide bar type Type Standard saw chain Pitch No. 5 m/s (870 m/min) 350 mm 320 mm 400 mm 355 mm 450 mm 415 mm Sprocket nose bar 492 (91PX) 3/8” 56 62 Recommended guide bar length Overall length (without guide bar) Net weight Extension cable (optional) DIN 57282/HO 7RN -F L=30 m max. 5 mm2 • Due to our continuing program of research and development, the specifications herein are subject to change without notice. € Specifications may differ from country to country. [. . . ] The arrow mark on the chain shows the direction of the chain. Fit in one end of the saw chain on the top of the guide bar and the other end of it around the sprocket. Align the tension slide with the hole of the guide bar. 13) OPERATION CAUTION: • Hold the tool firmly with right hand on the rear handle and left hand on the front handle when performing the tool. 20) CAUTION: • Always be sure that the tool is switched off and unplugged before checking function on the switch trigger. € Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. To start the tool, depress the lock-off button and pull the switch trigger. 13 Lubrication CAUTION: • Always be sure that the tool is switched off and unplugged before lubricating the saw chain. Lubricate the saw chain and bar using biologically degradable saw chain oil with an adhesion agent. The adhesion agent in the saw chain oil prevents the oil from being thrown off the saw excessively quickly. Hold the rear handle with your right hand, the front handle with your left. Make sure that the bar and the chain do not contact with any object. First press the lock-off button, then the switch trigger. Press the front hand guard forwards using the back of your hand. Make sure that the saw chain comes to an immediate standstill. CAUTION: • If the saw chain does not stop immediately, do not use the saw under any circumstances. consult DOLMAR authorized service centers. Checking the run-down brake Switch on the chain saw. Make sure the saw chain comes to a standstill within a second. CAUTION: • If the saw chain does not stop immediately, do not use the saw under any circumstances. consult DOLMAR authorized service centers. [. . . ] Stop using the tool immediately, and ask your local authorized service center. Stop using the tool immediately, and ask your local authorized service center. Chain does not stop even the chain brake is engaged. Adjust the guide bar and saw chain tension. [. . . ]