User manual DOLMAR GE-3200 L PARTS LIST 2006-05

[. . . ] Thank you very much for selecting the DOLMAR hedge trimmer. We are pleased to be able to offer you the DOLMAR hedge trimmer which is the result of a long development program and many years of knowledge and experience. The hedge trimmer models HT-2350D, GE-3200 L and HT-2375D combine the advantages of state-of-the-art technology with ergonomic design, light weight, handy, compact and represent professional equipment for a great variety of applications. Please read, understand and follow this booklet which refers in detail to the various points that will demonstrate its outstanding performance. [. . . ] The engine has been designed for use with DOLMAR two-stroke engine oil and a mixture ratio of 50:1 only to protect the environment. In addition, a long service life and a reliable operation with a minimum emission of exhaust gases is guaranteed. It is absolutely essential to observe a mixture ratio of 50:1 (DOLMAR 2-stroke engine oil), otherwise the reliable function of the hedge trimmer cannot be guaranteed. - The correct mixture ratio: Gasoline: Specified two-stroke engine oil = 50 : 1 or Gasoline: Other manufacturer's two-stroke engine oil = 25 : 1 recommended NOTE: For preparing the fuel-oil mixture, first mix the entire oil quantity with half of the fuel required in an approved canister which meets or exceeds all local code standards. Thoroughly shake the mixture before filling it into the hedge trimmer's tank. Do not add more engine oil than specified to ensure safe operation. It will only result in a higher production of combustion residues which will pollute the environment and clog the exhaust channel in the cylinder as well as the muffler. Utmost care is required when handling fuels. fuels may contain substances similar to solvents. Refuel either in a well ventilated area or outdoors. Do not inhale fuel vapors, avoid any contact of fuel or oil with your skin. check with your dealer for adjustment if in doubt. Check for clean and dry handles and test function of the I-O switch. - Start the hedge trimmer only in accordance with the instructions. Do not use any other methods for starting the engine. (See Starting) - Start the engine only after the entire assembly is done. Operation of the engine is only permitted after all the appropriate accessories are attached. - Before starting, make sure that the cutting blades have no contact with objects such as branches, stones, etc. - Before trimming, inspect the area for wires, cords, glass, or other foreign objects which could come in contact with the blade. Be aware of any and all electric lines and electric fences. Move at least 3 meters away from the place of refuelling. place the hedge trimmer on a clean area of ground. [. . . ] If the gap is too wide or too narrow, adjust it. If the spark plug is clogged with carbon or fouled, clean it thoroughly or replace it. - Supply grease through the grease nipple every 50 operating hours. WARNING: Inflammables strictly prohibited Check and clean the fuel filter monthly or every 50 operating hours. [. . . ]