User manual DOLMAR HT-140 PARTS LIST 1-01

[. . . ] Thank you very much for selecting the DOLMAR Hedge Trimmer. We are pleased to be able to offer you the DOLMAR Hedge Trimmer which is the result of a long development program and many years of knowledge and experience. The Hedge Trimmer models HT-2460, HT-140 combines the advantages of state-of-the-art technology with ergonomic design, they are light weight, handy, compact and represent professional equipment for a great variety of applications. Please read, understand and follow this booklet which refers in detail to the various points that will demonstrate its outstanding performance. [. . . ] 7 dB (A) Guarantee Sound Power: 105 dB (A) These sound power levels wear measured in accordance with Council Directive, 2000/14/EC. HT-2460 Model Dimension (L x W x H) Mass (without blade cover) Volume (fuel tank) Engine displacement Cutting length Maximum engine performance Maximum blade speed Idling speed Clutch engagement speed Carburetor type Ignition system Spark plug Electrode gap Right handle Vibration per ISO 10517 Left handle ahv eq Uncertainty K ahv eq Uncertainty K mm kg L cm Sound pressure level average according to ISO 10517 Sound power level according to ISO 10517 Mixture ratio (fuel: DOLMAR 2-stroke engine oil) Gear ratio 1) The data takes equally into account the idling and racing speed operating modes. It is run with a mixture of fuel and two-stroke engine oil. The engine is designed for unleaded regular fuel with a min. In case no such fuel is available, you can use fuel with a higher octane value. This will not damage the engine, but may cause poor operating behaviour. A similar situation will arise from the use of leaded fuel. To obtain optimum engine operation and to protect your health and the environment, only unleaded fuel should be used!- For lubricating the engine use a two-stroke engine oil (quality grade: TSC-3), which is added to the fuel. The engine has been designed for use with DOLMAR two-stroke engine oil and a mixture ratio of 50:1 only to protect the environment. In addition, a long service life and a reliable operation with a minimum emission of exhaust gases is guaranteed. Change location to start the engine (at least 3 meters away from the place of refuelling. Make sure the fuel stored is not accessible to children. - Thoroughly clean the area around the tank cap to prevent dirt from getting into the fuel tank. - Unscrew the plug and fill the tank with fuel. - Clean around the screw plug and the tank after refuelling. - Fuel cannot be stored for an unlimited period of time. - Please make sure that there are no children or other people within a working range of 15 meters, also pay attention to any animals in the working vicinity. - Before use always check that the Hedge Trimmer is safe for operation. Check the cutting device is not damaged, the control lever for easy action and check for proper function of the I-O Switch. Rotation of the cutting device during idling speed is not allowed. check with your dealer for adjustment if in doubt. [. . . ] - Immediately after cleaning is finished, attach the cleaner cover and tighten it with fixing bolts. (In remounting , first place the upper claw. ) Points in Handling Air Cleaner Element - Clean the element several times a day, if excessive dust adheres to it. - If operation continues with the element remaining not cleared of oil, oil in the air cleaner may fall outside, resulting in oil contamination. [. . . ]