User manual DOLMAR LS-6004 PARTS LIST 2006-06

[. . . ] Only for EU countries Do not dispose of electric equipment together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. 1 2 3 4 5 6 7 8 9 10 Red part Button Battery cartridge Lock-off button Switch trigger Sprocket cover Knob Cutter Guide bar Arrow 11 12 13 14 15 16 17 18 19 20 Spring Sprocket Boss Hook Hole Oil tank cap Oil inspection window Oil tank opening Tip guard Lower guide 21 22 23 24 25 26 27 28 29 Scabbard (chain cover) Push nut Slotted bit screwdriver Filter Locking ring Washer Limit mark Brush holder cap Screwdriver Model Chain speed per minute (min­1) Length of guide bar Type Saw chain Pitch No. of drive links Overall length Net weight Rated voltage · Due to our continuing program of research and development, the specifications herein are subject to change without notice. [. . . ] Use a secure support (trestle) when cutting sawn timber. Do not use the chain saw to prise off or brush away pieces of wood and other objects. Guide the chain saw such that no part of your body is within the extended path of the saw chain (see figure). Hazardous kickback may arise during work with the chain saw. Kickback arises when the tip of the bar (in particular the upper quarter) comes into contact with wood or another solid object. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. It may result in a risk of overheating, possible burns and even an explosion. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). Saw chain is automatically lubricated when the tool is in operation. Check the amount of remaining oil in the oil tank through the oil inspection window. To refill the tank, remove the cap from the oil tank opening. After refilling the tank, always screw the provided oil tank cap on the chain saw. cAUTION: · When filling the chain saw with chain oil for the first time, or refilling the tank after it has been completely emptied, add oil up to the bottom edge of the filler neck. The oil delivery may otherwise be impaired. ⷠAs a saw chain oil, use oil exclusively for Makita chain saws or oil available in market. ⷠNever use oil including dust and particles or volatile oil. ⷠWhen pruning trees, use botanical oil. Never force the chain saw when pruning trees. ⷠBefore cutting out, make sure that the provided oil tank cap is screwed in place. [. . . ] Always fit a new locking ring when replacing the sprocket. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. [. . . ]