User manual DOLMAR PS410

[. . . ] Please read the entire instruction manual before using and save it for future use. We apologise for any text or photo errors and any changes of technical data. If you have any questions concerning technical problems please contact our Customer Service Department (see address on reverse). Do not expose the main unit to rain or moisture. [. . . ] Select the average wind speed or highest measured wind speed by pressing the "+" or "­" buttons. Touch the same section a third time in order to set the alarm to sound for high wind speeds. Change the values with the "+" and "­" buttons or turn off the alarm with the ON/OFF button. Touch the same section a fourth time in order to set the alarm to sound for wind direction. Wind direction flashes in the display Use the "+" and "­" buttons to set the alarm to sound for the wind direction of your choosing. Turn off the alarm with the ON/OFF button. Use "+" or "­" to select the displaying of the amount of rainfall every hour, 4 hours, week, month or total overall rainfall. Press the rain gauge again and then "+" or "­" to display rainfall amounts in mm or inches. Touch the same section a third time in order to set the alarm to sound for high rainfall amounts. Change the values with the "+" and "­" buttons or turn off the alarm with the ON/OFF button. In order to reset the rain gauge, press the section and hold for 3 seconds. The rain gauge settings for hour, 4 hours, week, month, and total rainfall amounts are reset. Shift the display between sunny, cloudy, overcast and rainy with the "+" and "­" buttons. Use "+" and "­" in order to choose the threshold value for barometric pressure from ­ 4 hPa ( hPa is the pre-programmed value). Touch the same section a third time and use "+" and "­" to set the threshold value for storm from 3 - 9 hPa (4 hPa is the pre-programmed value). Press the section for barometric pressure and use "+" and "­" to choose absolute barometric pressure (the actual barometric pressure regardless of altitude) or relative barometric pressure (calculated from a combination of values for absolute barometric pressure and altitude). Use the "+" and "­" buttons to change between the the values for hPa, inHg and mmHg. Press the same section for a third time in order to adjust the settings for relative barometric pressure. Touch the same section a fourth time in order to set the alarm to sound high barometric pressure. Change the values with the "+" and "­"buttons or turn off the alarm with the ON/OFF button. Press the section for a fifth time and set the alarm to sound for low barometric pressure in the same way as the alarm was set for high barometric pressure. Touch the pressure bar graph section and then press "+" or "­" to toggle the bar graph time scale between 1hrs or 4hrs for pressure history. [. . . ] From (Start > Program > EasyWeather > EasyWeather) path and double click the "EasyWeather" icon to start the application. Connect the weather station to the computer's USB port with the included USB cable and run the EasyWeather. exe file in order to start the program. All possible settings on the weather station are shown in the programme. [. . . ]