User manual DOMENA NVT 150

[. . . ] - When unplugging the machine, pull the plug, not the cable. - Der Reiniger darf bei beschädigter Anschlußschnur, undichtem Wasserbehälter oder - Do not use the iron if it is damaged, if it leaks, or if the power cable is damaged. to Beschädigungen nicht verwendet werden. Um jedes Risiko von elektrischen Schlägen avoid any risk of electric shocks, do not dismantle your iron. [. . . ] Attaching cloth to the rectangular brush Press down on end of clamp ; secure cloth under clamp ; release clamp. Insert the anti-scale cartridge into the empty tank. To obtain steam, the anti-scale cartridge must be inserted into the water tank. You can use : tap water, distilled water for irons, and water p roduced by a condenser tumble drier provided that it is filtered (e. Do not use : Rain water, water from the fridge, water from any evaporator appliance, water supplied by your water softener if it indicates that the regenerating salts need replacing (incompatibility with the EMC system). With the anti-scale cartridge in place fill up the tank with tap water. Push the anti-scale cartridge firmly down in the tank and replace the tank cap. reseat tank in cleaner , ensuring tank is fully home. Never fill the reservoir with hot water. When switching on, the green pilot light A flashes. When the green pilot light A stays on permanently, the appliance is ready to dispense steam. To obtain continuous steam (maximum steam output), lock the steam trigger in A position with locking device B. The steam gun is provided with a safety lock. The steam gun is provided with a safety lock. When the steam trigger is released, lock it with locking device B, and this prevents accidental steaming. This prevents any accidental or inappropriate discharge or use steam especially when children are near. If the green indicator light flashes during use, the supply of steam is interrupted. Wait until the indicator light illuminates again before requesting steam. Please note : After long periods of steaming there may be some residual steam emitted after. You may choose the steam output level for each cleaning situation by turning the steam regulator. The table of applications on page 16 will help you choose the best setting for your particular task. programme Option (according to model) 2. [. . . ] Press the steam button - Go to your local approved service dealer - Fill the reservoir - Insert the reservoir and replace the tank cap - Go to your local approved service dealer - Wait until the indicator light illuminates again before requesting steam. To clean the body of the appliance, simply use a moist cloth. Do not use solvents or detergents which may harm the body material. The natural disposal of these elements may trigger harmful effects on human health and the environment. [. . . ]