Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DOMENA XPRIME 30. We hope that this DOMENA XPRIME 30 user guide will be useful to you.
Lastmanuals help download the user guide DOMENA XPRIME 30.
Detailed instructions for use are in the User's Guide.
[. . . ] Remove appliance from packaging place the appliance on a hard surface. Insert anti-scale cartridge – it must rest on the base of the water tank. Fill water tank as indicated, to the maximum level. Set the iron thermostat dial between the 2 and 3 dot settings. [. . . ] The generator and iron heating pilot lights comes on. Wait 30 seconds before the trying to use the iron. At that point you will hear an audible signal. Press steam trigger until steam comes out. When you switch on the iron, it may take up to 30 seconds before you can call for steam. The steam output will remain at a reduced level until the generator light goes out, by which time it will have reached the normal level. Please note : – Whilst you are ironing, the generator and iron heating pilot lights repeatedly go on and off. This is normal, and you can continue to iron and to use the steam. STEAM FLOW RATE CONTROL KNOB
• Economy mode = : For light or very quick ironing sessions, we suggest you that you set the control dial to Eco Mode (reduced steam output). Variable mode = : Adjust the flow control knob to suit the type of material being ironed. The volume of steam increases gradually as you turn the control knob towards the maximum ( ). Maxi mode = : At maximum setting, there is an initial burst of steam lasting for several seconds. The steam output will then return to a lower rate. To repeat this process, wait for a few seconds to avoid any risk of spotting. Never call for steam when there is no water in the reservoir. Please note • Because of the high steam output rate, there is no need to continually press the steam button. Pressing the button briefly and frequently will enable you to control the quantity of steam, in order to obtain professional results. It also prolongs the life of your anti-scale cartridge. If the iron is used intensively, steam may continue to be produced after the steam button has been released and water may appear on the iron holder. There is no risk of the metal being damaged. [. . . ] Do not use scouring powders, alkalines (as used with ovens), abrasives or steel wool. Please make sure that the soleplate is kept clean at all times to maintain the iron's ironing efficiency. - Behälter herausziehen und Filterkartusche richtig einsetzen
None of the lights are - Power supply problem lit. The machine does - Appliance not plugged in or On/Off button not pressed - Other not heat up. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DOMENA XPRIME 30
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DOMENA XPRIME 30 will begin.
