User manual DOPOD AMADEUS

[. . . ] User Manual 585 2 Dopod585 User Manual Safeguard Congratulations on the purchase of your new Windows MobileTM Dopod585! Please read before operating your device. THE DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. WHEN INSERTING YOUR SIM CARD, MAKE SURE THE DEVICE IS POWERED OFF, AND THAT THE SIM CARD SNAPS INTO THE SOCKET SECURELY. [. . . ] When in the Home screen, select Settings > Bluetooth > Bluetooth from the Start menu. Select Devices from the menu, and then New. Your device searches for other Bluetooth devices and displays them in the list. Select the device you want, then select Add. 110 Dopod585 User Manual 5. In PIN, enter a PIN of between 1 and 16 characters, and select Done. If desired, enter the name of the other device in Name, and select Done. 5. Getting Connected To accept a bond: 1. Make sure that Bluetooth is turned on and in Discoverable mode. When prompted to bond with the other device, select Yes. In PIN, enter a PIN of between 1 and 16 characters, and select Done. You must enter the same PIN that was entered on the device requesting the bond. Optionally, you can enter the name of the device requesting the bond in the Name field. You can now exchange information with the other device. To delete a bond: 1. Select Settings > Bluetooth > Bluetooth from the Start menu. Select the bond you want to delete, then select Delete from the menu. NOTE: Select Settings > Bluetooth > BT Setting to enter a name for your device; to enable/disable Beam Authentication requirements; or to perform ActiveSync setup (bond with other Bluetooth device which supports serial port or ActiveSync profile as your ActiveSync partner). Dopod585 User Manual 111 5. 4 Modem Link Using Modem Link, you can use your Dopod585 as an external modem for another device or computer by using an infrared, bluetooth, or USB connection. To set up an infrared, USB, or Bluetooth connection: 1. Ensure that your Dopod585 is not connected to another device. Select Accessories > Modem Link from the Start menu. In the Connection field, select USB, IrCOMM, or Bluetooth. The default Baud Rate is set at 115, 200. Press the Right Softkey to open the menu in the Modem Link screen, then select Activate from the menu. Press the Left Softkey ("Done"). 5. [. . . ] See Chapter 3 for a list of Album's supported image/video file formats. When in the Camera screen, you can adjust for different lighting conditions by opening the menu and selecting Ambience and/or Adjust View properties. A warning message about "Running out of memory" pops up on the screen. I cannot open an image or video file using Album. The image appears dark on my screen when in Camera mode. Appendix 200 Dopod585 User Manual ActiveSync Problems Problem ActiveSync operation cannot be performed or connected. · Solution Make sure the Mini-USB cable is connected securely. [. . . ]